Bedienungsanleitung Honeywell HCF 82 (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

585432

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Overview

Contents

1. Overview ............................................................... 7

1.1. Application............................................................. 7

1.2. Differences HCW 82/HCF 82 ................................ 7

1.3. Scope of delivery................................................... 7

2. Commissioning...................................................... 7

2.1. Binding .................................................................. 8

2.1.1. Assignment to underfloor heating controller .......... 8

2.1.2. Assignment to evotouch ........................................ 8

2.1.3. Failed binding........................................................ 8

2.2. Installation ............................................................. 8

3. Particular features of HCW 82............................... 9

3.1. Operation .............................................................. 9

3.2. Limiting the adjustment range ............................... 9

3.3. Operation with an external power source.............. 9

3.4. Installing the window contact............................... 10

4. Changing batteries .............................................. 10

5. Checking radio transmission ............................... 10

6. Help with problems.............................................. 10

7. Technical data ..................................................... 10

8. WEEE directive 2002/96/ EC - Waste Electrical

and Electronic Equipment directive ..................... 10

1. Overview

The HCW 82/HCF 82 room devices are used for intelligent

room temperature control. The room temperature sensor

HCF 82 measures the room temperature and sends the

measured values to other devices.

The HCW 82 measures the room temperature and

additionally allows the room setpoint temperature to be

adjusted.

1.1. Application

The room devices transfer the data with 868.3 MHz. The

data can be received by other devices such as the

underfloor heating controller HCE 80/HCC 80/HCE 80R/

HCC 80R or the evotouch.

Thus a large spectrum of applications can be covered.

1.2. Differences HCW 82/HCF 82

The HCW 82 has the following functions in addition to those

of the HCF 82:

• Connection possibility for an external power supply unit

(see "Operation with an external power source", Page 9).

• Connection possibility for a window contact

(see "Installing the window contact", Page 10).

• Adjustment dial at which you can change the room

temperature setpoint directly.

The adjustment range amounts to ± 12 °C, starting from

the basic value of 20 °C (in position 0).

1.3. Scope of delivery

• 1 HCW 82/HCF 82

• 2 AA batteries

2. Commissioning

WARNING

Insufficient data transfer!

Interference of the radio receiver in the

device through metallic objects or

further radio devices.

► Ensure there is sufficient distance to

metallic objects.

► Mount the device with a distance of at

least 1 m to radio devices such as

radio headphones, cordless phones

according to the DECT standard, etc.

► Select another installation site if the

radio interference cannot be rectified.

Fig. 1: Removing the housing cover

► Remove the housing cover of the room temperature

sensor (see Fig. 1).

Fig. 2: Battery polarity and Bind button

► Insert the supplied AA batteries with the correct battery

polarity (see Fig. 2).

The batteries have to be replaced when the red LED at the

HCW 82/HCF 82 flashes (see "Changing batteries",

Page 10).

The setpoint adjuster HCW 82 can also be

operated with an external power source instead

of with batteries. Further information can be

found in section "Operation with an external

power source", Page 9.

► Place the room temperature sensor at the installation site,

but do not install it yet.

► Allocate the corresponding temperature zone to the

HCW 82/HCF 82 (see "Binding", Page 8).

Red LED

Bind button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HCF 82 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info