723795

Honeywell HPA090 series Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
4 5
This product earned the ENERGY STAR rating by meeting strict energy efficiency guidelines set by
the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from
the use of this product.
Portable air purifiers are more effective in rooms where all doors and windows are closed. In general, it is
recommended that you run your air purifier while you are at home to clean the air.
HPA090 Series Operation:
• Once the filters have been unwrapped and replaced in the unit, ensure the
air purifier’s control knob is turned to the OFF position and plug the power
cord into a working electrical outlet.
• Select the desired cleaning level by turning the knob to General Clean,
Allergen or Turbo setting (Fig. 3).
• The Turbo setting will operate the air purifier at the highest speed. This
setting will maximize the unit’s ability to help reduce odors and will help clean the air quickly if you have
a specific air quality issue that needs to be addressed.
• The Allergen setting will effectively help reduce airborne allergen from the air that passes through the filter.
HPA100, 200, 300 Series Operation:
• Once the filters have been unwrapped and
replaced in the unit, plug the power cord into a
working electrical outlet.
• Select the desired cleaning level by simply
TAPPING the power symbol (
) to toggle through
the setting options. A blue LED light will illuminate the selected setting: Germ, General Clean or Allergen.
TAP POWER (
) for on/off & cleaning level selection.
ALLERGEN optimizes allergen capturing performance during allergen season.
GENERAL CLEAN for general, everyday air cleaning.
GERM optimizes germ capturing performance. Use during cold & flu season.
TAP TURBO (
) for power cleaning or fast odor reduction.
• The Turbo setting operates the unit at the highest speed. This setting will maximize the unit’s ability to
help reduce odors and will help clean the air quickly. To select the Turbo setting the unit must already
be running at one of the 3 cleaning settings, TAP the Turbo icon (
). The Turbo LED will illuminate.
TAPPING the Turbo icon (
) again will return the air purifier to the previous cleaning setting. To shut
OFF, tap the Power symbol (
) until the air purifier shuts off.
Using the Timer Option (Not available on the HPA090 Series):
The Timer Option (
) allows you to select how long the air purifier will run before
it automatically shuts off. There are three pre-set run times: 2, 4, and 8 hours. Do
not use this option if you want the unit to run continuously.
• To set the unit for Automatic Shut Off, TAP the Auto-off Timer icon (
).
• Continue to TAP to toggle through to the desired time setting.
• An LED light will illuminate to indicate the selected run time (Fig. 5).
• The unit will automatically shut off after the indicated run time.
MAINTAINING YOUR STAGE 1 WASHABLE PARTICLE PRE-FILTERREPLACING THE TRUE-HEPA FILTERS
See INSTALLATION INSTRUCTIONS on page 3 of this manual.
You may be able to purchase Honeywell replacement True-HEPA filter
R
A
A
R
for your air purifier at the store
where you purchased your air purifier or they can be ordered directly from Kaz USA, Inc., the licensee of
Honeywell air purifiers at www.replacementfilters.com. If you have any questions, contact Kaz Consumer
Services at 1-800-477-0457.
Please note that each model series takes a different number of HEPA filters: HPA090 and HPA100 Series use 1 HEPA
R
A
A
R
Replacement Filter, HPA200 Series use 2 HEPA
R
Replacement Filters , HPA300 Series use 3 HEPA
R
A
A
R
Filters
These air purifier models each have two electronic filter checks to remind you
when to check and replace the True-HEPA filters and the Odor Reducing Pre-
Filters based on the air cleaner’s hours of use.
When the True HEPA filter(s) and/or the Pre-Filter need to be replaced, the
“Check Filter” or “Check Pre-Filter” light will illuminate (Fig. 7).
You should periodically check these filters. Depending on operating conditions,
the True-HEPA filters should be replaced every 12 months, and the Odor
Reducing Pre-Filters every 3 months, especially if there have been heavy odors
and particles in the home.
To RESET Either Electronic Filter Check:
After you have replaced the appropriate filter(s) the “Check Filter or “Check Pre-Filter” light will remain
on until it is reset. With the unit powered on, press the lighted button and hold for approximately 2
seconds until the light turns off. The electronic filter check is now reset. Depending on individual usage
(environment and hours used), you may need to replace filters more or less frequently.
NOTE: If you change the Pre-Filter or Filter before the Electronic Filter Check lights are illuminated, it is
possible to re-set the light indicators. With the unit plugged in, but NOT powered on, press and hold each
button individually for at least 5 seconds. This will illuminate the indicator light. After the light turns on,
individually press and hold the “Check Filter” or “Check Pre-Filter” button until each light goes off. At this
point, the filter indicator will be re-set to it’s original “clean” status.
These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent
upon the concentration of contaminates going through the system. High concentrations of contaminates
such as dust, pet dander and smoking will reduce the useful performance of the filter.
NOTE: None of the filters are washable. Do not immerse them in water.
ELECTRONIC FILTER CHANGE REMINDER
Fig. 7 Will illuminate
when it is time to
change HEPA filters
OPERATION
Fig. 5 Timer Function
Using the Dimmer Option (Not available on the HPA090 Series)
The Dimmer Option (
) allows you to adjust the brightness of the LED displays on
the control panel (Fig. 8). You may wish to adjust the brightness depending on the
room where the unit is placed. The unit always turns on with the brightness on HIGH.
To adjust brightness:
• TAP the Dimmer icon (
) once to dim the lights to LOW.
• TAP the Dimmer icon (
) twice and it will shut the lights OFF. (the air purifier
will not shut off).
• TAPPING the Dimmer icon (
) a third time will return the brightness to HIGH.
Fig. 6 Dimmer Function
Fig. 3 HPA090 Control Panel
Fig. 4 HPA100, HPA200, HPA300 Control Panel
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell HPA090 series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info