Bedienungsanleitung Honeywell HPA3100 (Seite 6 von 33) (Englisch, Französisch, Spanisch)

723826

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

OPERATION

1. Ensure that the plastic wrap has been removed from the filters and the filters are replaced in the unit. Next,

plug the power cord into a working electrical outlet.

2. Tap Power Button to turn on the air purifier. The air purifier will start automatically on the Germ setting

until another cleaning level is selected. Continue tapping to choose a different cleaning level. With each tap,

one of the cleaning level icons will illuminate. Each cleaning level is optimized to capture each particulate size:

GERM : optimizes germ capturing performance during cold & flu season.

GENERAL CLEAN : recommended for dust and general, everyday air cleaning.

ALLERGEN : optimizes allergen capturing performance during allergen season.

3. To shut off, tap the Power Button until the air purifier shuts off.

TURBO MODE

When Turbo mode is selected, the Turbo button will illuminate. This setting operates the air purifier

at the highest cleaning level and maximizes its ability to help clean the air and help reduce odors and

VOCs quickly. Tapping the Turbo button again will return the air purifier to the previous cleaning setting.

AUTOMATIC CLEANING MODE & AIR QUALITY INDICATOR

(only available in the HPA3200 and HPA3300 series)

These select air purifier models are equipped with VOC Sensors that detect the level of VOCs in the room

and provide a visual display to indicate air quality. The Air Quality Indicator color display is located above

the Auto button . The VOC Sensor is constantly monitoring the air and the Air Quality Indicator light

will illuminate either green, yellow, or red depending on the level of VOCs detected in the room:

Green  Good air quality. There is a low level of VOCs detected.

Yellow – Moderate air quality. There is a moderate level of VOCs detected.

Red – Poor air quality. There is an elevated level of VOCs detected.

VOCs are gases that are emitted from certain household cleaning, home improvement, and even common home

decor products. These gases can be harmful or irritating if inhaled.

The progressive Air Quality Indicator display will minimize when there is good quality and will enlarge to

indicate poor air quality.

When the Auto mode is activated, the air purifier will automatically operate at the appropriate cleaning level to

reduce the VOCs that are detected in the room. To select this mode, tap the Auto button and the icon will

illuminate to indicate the setting has been activated.

NOTE: Upon start up, the unit may take a few minutes to calibrate and measure the air quality. During this time,

the Air Quality Indicator will pulse between green, yellow, and red until the air quality is determined. When the

appropriate reading is determined, the indicator will then remain a solid color.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HPA3100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info