Bedienungsanleitung Honeywell HPA600 series (Seite 3 von 12) (Englisch, Spanisch)

723811

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

4 5

FIRST TIME USE

There are two 3-in1 HEPA Filters supplied within your air purifier. These

filters provide three stages of cleaning performance: HEPA filter media that

helps capture up to 99.97% of airborne particles as small as 0.1 micron

antimicrobial coating that inhibits growth of bacteria on filters

, and activated

carbon granules help absorb odors and VOCs. The filters are wrapped to

ensure purity, and are labeled to help identify the proper replacement filter

(Type

filters should be replaced 1x/year). Before using your new air

purifier, you must remove the wrappers covering the filters.

• Make sure the air purifier is OFF and unplugged.

• Open the rear door to remove the filters . Remove the HEPA filters from the

two sides of the unit (see Fig. 2).

• Remove the filters from the plastic bags.

• Install the filters into the unit with the red pull tabs facing outward

(this will facilitate filter removal later). The side of the filter with the carbon

granules (black side) and foam seal should be facing in to the purifier

housing (see Fig. 3).

• Close the rear door and plug the unit into an outlet. You are now ready to

use your new Honeywell Professional Series™ True HEPA Air Purifier.

ENERGY STAR

This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by the U.S.

EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from the use of

this product.

The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio between the model’s

Clean Air Delivery Rate (CADR) for Dust and the electrical energy it consumes, or CADR/Watt.

OPERATING INSTRUCTIONS

• Ensure the air purifier is plugged into a working electrical outlet. A chime will sound and the power light will

illuminate when plugged in.

• Tap the power icon once. The unit will start at cleaning level 2 and remain on this setting until another

cleaning level is selected.

• Tap the Cleaning Level icon to select a different cleaning level.

Portable air purifiers are more effective in rooms where all doors and windows are closed. It is recommended that

you run your air purifier while you are at home to help clean the air. If desired, or conditions warrant, you may run

your air purifier 24 hours a day.

Fig. 2

Fig. 3

CONTROLS

The Honeywell Professional

Series™ True HEPA Air Purifier

has easy-to-use controls to

help you manage your indoor

air quality. Each time you

select a setting you will hear

a chime indicating the setting

has been changed.

CLEANING LEVEL SELECTOR

This controls the air cleaning level of the unit. This Honeywell Professional Series™ Air Purifier has 4 cleaning

levels plus a Turbo setting for power cleaning. Each time you turn your air purifier on it will start at cleaning level 2

setting. TAP the icon to cycle through the cleaning levels to reach the desired setting.

Level 1 – Sleep

This setting is best for ultra-quiet operation, perfect for nighttime use when sleeping.

Level 2 – Germ

This setting slows down air movement so microscopic airborne germs are most effectively captured in

the filters. Germs, like certain bacteria and viruses, can be much smaller than other airborne particles or

organisms. Giving the germs more time to dwell in the filters increases the filtration efficiency. This setting

can be used during cold and flu season to help reduce certain germs from the air that passes through the

filters.

Level 3 – General Cleaning

Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those

resulting from cooking or tobacco smoke. This setting is also very effective in reducing airborne pet dander.

Level 4 – Allergen

This setting makes the air purifier perform at the proper level for reducing many types of airborne allergens.

It ensures the allergen capturing efficiency and rate is best for the particle sizes being captured.

TURBO MODE

When Turbo Mode is selected the will illuminate. This setting operates the air purifier at the highest cleaning

level and maximizes its ability to help clean the air and help reduce odors and VOCs quickly.

AIR QUALITY INDICATOR

Your Honeywell Professional Series™

Air Purifier is equipped with Particle

and VOC Sensors that detect the levels

of particles and VOCs in the room and

provide a visual display to indicate air

quality. The Air Quality Indicator is an LED display located on the front of the air purifier below the Honeywell logo.

The particle and VOC sensors are constantly monitoring the air and the air quality indicator light will illuminate

blue, amber, or red depending on the level of VOCs and/or particles detected in the room.

Blue – Good air quality. There is a low level of VOCs and particles detected.

Amber – Medium air quality. There is a moderate level of VOCs or particles detected.

Red – Poor air quality. There is an elevated level of VOCs or particles detected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HPA600 series Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info