5
ENGLISH
IMPORTANT SAFETY INFORMATION
Read through all the instructions before starting to use the
fan. Keep this instruction manual in a safe place for future
reference.
1. Supervision is necessary when the fan is used near chil-
dren. Keep the remote control in a place which is inacces-
sible to children.
2. The fan must only be connected to a single-phase
power socket with the current as stated on the type plate.
3. Switch the fan off and disconnect the power plug (19)
from the socket when the fan is not in use, or when it is
moved, handled or cleaned. Do not tug at the power cord
(19) to disconnect the plug.
4. Unwind the power cord (19) completely. An incomplete-
ly unwound power cord can lead to overheating and cause
a fire.
5. Do not use an infinitely variable speed controller. This
can lead to overheating, fire, electric shock, or faults in the
appliance.
6. The fan must only be used after it has been fully and
correctly mounted as described under the "Mounting
Instructions".
7. Do not plunge the fan and the remote control into water
or any other liquids and do not pour water or any other
liquids over the fan or remote control. Make sure that the
remote control (20) is not exposed to direct sunshine.
8. Clean the fan and the remote control (20) regularly by
following the cleaning instructions.
9. The fan must only be operated according to the instruc-
tions in this user manual. Non-observance of these
instructions can result in injuries, fire or electric shock.
10. Never push fingers or objects through the blade grid
when the fan is running. This can lead to personal injury
and faults in the appliance.
11. Use only batteries Type AAA, 1.5V in the remote con-
trol. When you replace the batteries, use only new batte-
ries of this type and dispose of the old batteries for recy-
cling and according to your local regulations.
12. If you do not intend to use the remote control (20) for
a longer period (4 weeks or more), remove its batteries.
13. The fan is intended only for private use indoors and
not for commercial use. Do not use the fan near a bathtub,
shower or swimming-pool, or at any location where water
could splash.
14. Do not operate the fan if it is damaged or could show
signs of damage, or if it does not function properly. Dis-
connect the power plug (19) from the socket.
15. Place the fan on a firm, even, dry surface. Make sure
the fan is standing securely so that it cannot tip over or fall
down. A safety distance of at least 50 cm from other
objects must be observed.
16. If the power cord (19) of the fan is damaged, it must
be replaced by the manufacturer or at a manufacturer-
approved repair centre or by similarly qualified persons, so
as to avoid damage.
CONSTRUCTION
1. Base
2. Cross recess screws with screw nuts
3. Mounting rod
4. Locking ring on telescopic rod
5. Base cover
6. Telescopic rod
7. Fan motor retainer screw with nut
8. Fan motor
9. Spindle
10. Plastic nut
11. Rear grid
12. Transport handle
13. Fan blade
14. Retainer screw
15. Spindle protrusion
16. Front grid
17. Connecting screw with nut
18. Connecting clips
19. Power cord with power plug
20. Remote control
21. Battery compartment
22. Cover
23. Control panel
24. Power key
25.
Speed key
26. Speed indicator
27. Timer key
28. Timer indicator
29. Oscillation knob
30. Tilt angle rotary knob
FIRST TIME OF USE
1. Read through all the instructions before using the fan.
2. Unpack all parts of the fan completely. Remove all the
packaging materials and dispose of them for recycling.
3. Mount the fan as described under "Mounting instruc-
tions". The fan must be fully and correctly mounted before
use.
