Bedienungsanleitung Honeywell HS1655E (Seite 3 von 27) (Alle Sprachen)

695197

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

2 3

ENGLISH (GB)

IMPORTANT SAFETY INSTRUCTIONS

Read through all the instructions before

starting to use the appliance.

Keep this manual

in a safe place for future reference.

These instructions are also available on our

website. Please visit www.hot-europe.com.

• This appliance must only be operated as

instructed in this user manual.

• This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved. Children shall not

play with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

• Do not touch the rotating fan blades with

any part of the body. This can cause personal

injury and damage.

• Clean the appliance regularly by following the

“Cleaning Instructions”.

• This appliance is only designed for indoor use.

• Unwind the power cord completely. Failure to

do so could cause overheating and possible

fire hazard.

• Do not tug at the power cord to disconnect the

plug. Do not touch the power cord with wet

hands. Do not remove the power plug from the

power socket while the product is in use.

• Do not use accessories, spare parts or

components not expected and / or provided

by the manufacturer.

• Always switch the appliance off and

disconnect the power plug from the power

socket when the appliance is not in use or

during transport.

• Do not use this appliance if it is damaged or

shows any signs of possible damage or if it

is not functioning properly. Disconnect the

power plug from the power socket.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualified persons in order

to avoid a hazard.

• Never touch the unit with wet hands.

COMPONENTS (See page 1)

1. Base

2. Pole base cover

3. Metal fan pole

4. Height adjustment locking nut

5. Metal pole extension

6. Power cord

7. Locking screw

8. Control panel

9. Motor assembly

10. Oscillating control knob

11. Carrying handle

12. Rear grille

13. Rear grille locking nut

14. Fan blade

15. Blade locking nut

16. Front grille

17. 3 Base assembly screws

CONTROL PANEL

I. ON/OFF power button

II. Speed control button

III. Timer button

REMOTE CONTROL

IV. ON/OFF power button

V. Speed control button

VI. Timer button

ASSEMBLY INSTRUCTIONS (See page 2)

A. BASE ASSEMBLY

• Place Base on a flat surface.

• Align 3 screw holes on the bottom pole (3) with the 3 base

holes (Fig. 1).

• Insert 3 screws (17) and tighten by hand.

• Slide pole base cover (2) over metal Fan Pole (3). Turn until

cover locks into place (Fig. 2).

B. FAN HEIGHT ADJUSTMENT

• Loosen locking nut (4) and raise Metal Pole extension (5) to the

desired height and tighten nut (Fig. 3).

Fig. 1 Fig. 2

1 1

3 3

Fig. 8

Fig. 9

Fig. 5

Fig. 11

Fig.10

Fig. 6

Fig. 3

Fig. 4

ASSEMBLY INSTRUCTIONS

OSCILLATION OPERATION

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

Fig. 7

HS1655E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HS1655E Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info