Bedienungsanleitung Honeywell HUL570 series (Seite 4 von 28) (Englisch, Französisch, Spanisch)

723830

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

6 7

MAX

FILLING/REFILLING THE WATER TANK (CONTINUED)

1. Pour cool water from a pitcher or jug directly into Water Tank.

2. Fill to the MAX line marked on the outside of the Tank or to the MAX indicator on the

Tank Cover. Replace the Tank Cover if it was removed for ﬁlling.

Option 1: To Fill Tank at the Humidiﬁer

Step 3 Step 2 Step 4

Step 1

Step 2 Step 4

Step 1

Step 2

Step 1

1. Grasp Tank Handle and lift Water Tank to remove from Base. Carry Tank to sink.

2. Fill Tank with cool water to the MAX line marked on the outside of the Tank or to the

MAX indicator on the Tank Cover. Replace the Tank Cover if it was removed.

3. Carry Water Tank back to humidiﬁer.

Note: The Tank should be carried using two hands; one hand on the Handle located

on top of the Tank and other hand supporting the bottom of the Tank.

4. Replace the full Tank on the Base.

CAUTION: Use care when handling Water Tank to avoid unnecessary impact.

Banging or dropping the Water Tank could result in damage to the Tank that may

cause leaking.

Option 2: To Fill Tank at the Sink

USING YOUR HUMIDIFIER

1. Power: With the Power Knob in the OFF position ( O ), plug humidiﬁer into a polarized

120V outlet.

CAUTION: TO AVOID ELECTRIC SHOCK DO NOT PLUG HUMIDIFIER INTO OUTLET

WITH WET HANDS.

2. Output: Turn the Power Knob clockwise to highest setting.

3. Position humidiﬁer to direct mist output away from walls, furniture and bedding.

Mist Outlet can rotate 180° and is removable for cleaning.

4. Humidity Level: When a comfortable humidity level is reached, turn Power Knob to a

lower setting. A comfortable humidity level is between 40-60%.

CONDENSATION: If you notice condensation on the walls, windows or around unit,

your humidity level is too high. Turn humidiﬁer off and open door to room.

To monitor your humidity level, use a humidity monitor such as the Honeywell HHM10B,

HHM10 or H10C available at retailers or www.HoneywellPluggedIn.com.

Note: Auto shut off feature will activate when water runs out of the Tank or the Tank is removed

from the unit. The auto shut off will not turn off the Power Knob light; it will just turn off the fan

and nebulizer.

1. Turn off, unplug and remove Tank Cover. Empty Water Tank.

2. Empty Reservoir by slowly pouring from the top of the Housing on the opposite side from the

Mist Outlet and away from Power Knob. Wipe outside of housing to dry any water that

may have escaped between Base and Housing.

3. Rinse Tank, wipe clean and dry with a soft cloth or paper towel.

4. Reﬁll Water Tank with cool water according to Filling/Reﬁlling the Water Tank instructions.

Note:

Ensure the Float Paddle remains properly installed before ﬁlling. See Float Paddle

Installation instructions if necessary.

CAUTION: Improper placement of the Float Paddle could result in leaking or water

not feeding to the Reservoir.

MAX

Step 3 Step 2 Step 4

Step 1

How to Use

Step 3

Daily Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HUL570 series Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info