Bedienungsanleitung Honeywell HZ-789 series (Seite 4 von 18) (Englisch, Französisch, Spanisch)

724044

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

HZ-789 OPERATION

NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED.

With the Power Button (

) in the OFF position, plug the heater into a 120V outlet.

DO NOT FORCE THE THREE PRONG SUPPLY CORD INTO THE OUTLET; it will only t

one way.

Turn the heater on by pressing Power Button (

) button, (Fig. 4). The heater will

default to the Constant HI mode and the Current Temp Indicator will display the

current room temperature.

As the heater warms up, the oil in the metal columns may naturally expand and

make a slight ticking sound. This is normal and will stop once the oil has reached

the optimal temperature.

The Energy Usage Indicator will display the power consumption used by the heater.

• If HI, the heater is drawing 1500 watts to quickly warm the room

• If LO, the heater is drawing 900 watts to slowly warm the room or maintain the

temperature.

• If STAND BY, the heater is drawing no power as the room has reached the Desired

Temperature. At this point, the heater is most ecient and is drawing only a few

watts of energy while in STAND BY mode.

To set the heater, (Fig. 5) the digital control is equipped with two (2) modes:

Constant Heat Mode - there are two (2) heat settings

1 For Constant Low, press SET to LO; this setting uses 900 watts of power

2 For Constant High, press SET to HI; this setting uses 1500 watts of power

NOTE: Because the LO setting does not require as much electricity to operate,

it is more energy ecient and may be a better option if you are concerned about

saving energy.

EnergySmart® Mode - A smart thermostat that helps you save energy. Press SET to

choose from four (4) comfort settings of 65°F (18°C), 70°F (21°C), 75°F (24°C), 80°F

(27°C). This is your desired room temperature. The EnergySmart® thermostat will

automatically select the appropriate power level to best accommodate your Desired

Temperature. As the air temperature (Current Temp) in the room approaches the

Desired Temperature, the heater will automatically lower the power consumption

to provide consistent warmth without wasting energy.

The Current Temp Indicator will display the current room temperature.

NOTE: In the EnergySmart® mode, the Energy Usage Indicator will display what

power consumption the heater has automatically selected to eciently meet your

Desired Temperature.

• To override the EnergySmart® function, turn the heater OFF (

) or press SET to

choose a Constant Heat mode.

• To set the Timer, (Fig.6) press the (

) button to select 2, 4, 6, 8, 10 or 12 hour

setting. The heater will run for that chosen period in the selected mode and

automatically shut o after the desired time has passed. Timer will count down

to display the remaining time.

Heat Setting

Control

Fig. 5

Fig. 6

Timer

Current

Temp

Indicator

Energy Usage

Indicator

Fig. 4

Power

Button

Constant

Heat

Modes

EnergySmart®

Modes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HZ-789 series Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info