Bedienungsanleitung Honeywell LYNX Touch (Seite 5 von 96) (Englisch)

554938

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

– 5 –

SYSTEM OVERVIEW

SYSTEM OVERVIEWSYSTEM OVERVIEW

SYSTEM OVERVIEW

Features

General Information

This system offers you three forms of protection: burglary, fire, and emergency, depending on

the configuration of your system. The system consists of a touch screen control for system

operation, various wireless sensors that provide perimeter and interior burglary protection,

and optional smoke or combustion detectors to provide early fire warning. In addition,

optional wireless keypads or key fobs may have been installed to allow you to control the

system away from the touch screen control. The system may also be used as a speaker phone.

The system monitors protection zones and system status, displays appropriate information

on the touch screen display, and initiates appropriate alarms. Your system may also have

been programmed to automatically send alarm or status messages over the phone lines or via

the cellular/GSM network or the internet to a central alarm monitoring station, and may also

be capable of two-way voice communication with the central station.

IMPORTANT SECURITY NOTICE

Your key fob is similar to your keys or access card. If lost or stolen, another person can compromise your

security system. Immediately notify your Dealer/Installer of a lost or stolen key fob. The Dealer/Installer will

then remove the key fob programming from the security system.

The user features of this security system are listed below. Ask your installer which features

have been programmed for your system.

• Stay and Away arming modes: By using these modes you can protect either the

perimeter only, or the entire premises.

• Panic key functions: A designated key allow you to manually activate fire, medical

emergency, or silent police alarms. Refer to the Panic Keys section for detailed information.

• Follow me reminder announcements: Allows the panel to dial a number that you have

specified, at a programmed day/time and deliver a message programmed by your installer.

• Real-time clock: Touch screen displays current date and time. Refer to the

Clock/Calendar section for procedures for setting the time.

• Message center: The system allows recording and play back of brief voice messages. Refer

to the Recording/Playback Messages section for procedures.

• Two-way voice: Allows the central station to listen, talk to or conduct two-way

conversations with individuals on the premises Refer to the Two-Way Voice section for

detailed information.

• Phone Control: Provides a remote interactive phone capability that permits access to the

security system from any off-site touch-tone telephone. Refer to the Remote Phone Control

Feature section for detailed information.

• Speaker Phone: The system is capable of operating as a speaker phone allowing hands

free telephone conversation. Refer to the Speaker Phone Feature section for detailed

information.

• Security Codes: The system is capable of supporting an Installer code, Master user code

and 14 additional User codes including Babysitter and Duress codes. Refer to the Security

Codes section for detailed information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell LYNX Touch Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info