11
69-1012
to give the furnace a head start to heat the
house before you arrive home. (Again, this is
higher heating or lower for cooling.)
SLEEP is the time period you can set for an
energy-saving temperature while you are
sleeping. (Again, this is lower for heating or
higher for cooling. For more comfortable
sleeping, some people choose not to raise the
cool temperature during the night.)
You will set one schedule for weekdays and
another for weekends, because your require-
ments will probably be different for each. Also,
during weekends, only the WAKE and SLEEP
time periods are available.
Fill in the times and temperatures you desire
for weekdays and weekends. If you decide not
to program the thermostat, it will automatically
control heating at 68°F (20°C), and cooling at
78°F (26°C), 24 hours a day. Also, you do not
need to enter a time and temperature program
for all periods if your schedule does not require
it. For example, a house that is occupied
during weekdays would only require programs
for WAKE and SLEEP.
If no program is entered for the weekends, the
thermostat will operate on the weekday SLEEP
program all weekend.
Before programming, remove the clear plastic
overlay covering the display.
When pressing the keys, use the ball of your
finger or a soft pencil eraser. Using sharp
fingernails or pencil points can damage the
keypad.
If you make an error at any time during
programming, just press the RUN PROGRAM
key, and continue again at the step where you
left off.
