Bedienungsanleitung Honeywell MO 10 Series (Seite 11 von 49) (Englisch, Französisch, Spanisch)

688089

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

8EN

USE & OPERATION (CONTINUED)

REMOTE CONTROL

The functions work the same as the Portable Air Conditioner's Control Panel.

All key functions can be accessed from the remote control.

Note:

Battery Installation: Remove the cover on the back of the remote control and insert two AAA

batteries with + and - pointing in the proper direction according to the polarity markings.

Use only two AAA or IEC R03 1.5V batteries.

Remove the batteries if the remote control is not in use for a month or longer.

All batteries should be replaced at the same time, do not mix with old batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

Properly dispose of used batteries.

Caution:

Power Control

ON / OFF

Temperature / Timer Set

Used for adjusting the timer and

temperature.

When the

Ÿ

key is pressed, the

set temperature is displayed and

may be adjusted

Timer setting is available from 1 - 24 hours

by pressing the key

Mode Control

Fan Speed Control

Timer Control

In running mode: Auto switch off

In stand-by mode: Auto switch on

Press

button to adjust the

time setting for 1 hour intervals.

Air Conditioning Dehumidifying

Fan

Press this button to change the operation

mode in the order of:

Applicable for model MO08 Series:

ť)*()ť-08

Applicable for model MO10 Series:

ť)*()ť.*%ť-08

This device complies with part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ť3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB

ť*ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOEUIFSFDFJWFS

ť$POOFDUUIFFRVJQNFOUJOGPBOPVUMFUPOBDJSDVJUEJGGFSFOUGSPNUIBUUPXIJDIUIFSFDFJWFSJTDPOOFDUFE

ť$POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJP57UFDIOJDJBOGPSIFMQ

Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell MO 10 Series Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info