Bedienungsanleitung Honeywell ST9120C (Seite 10 von 26) (Englisch)

613686

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Note: When pressing the button the next ON or OFF marker may start to ﬂash.

This indicates you have tried to set a time equal to one of the next programme times

already in the memory. Similarly, when pressing the

button the previous ON or

OFF marker may start to ﬂash. This indicates you have tried to set a time equal to

one of the previous programme times. If this happens the ST9120C simply moves

both times together as long as you continue to press the

or buttons. Follow

the procedure in ‘Reviewing the Programme Times’ (page 9) to check and adjust

these times as necessary.

‘SET OFF-TIME 1’ will be displayed and the ﬁrst OFF 1 time will now be ﬂashing. If

you do not wish to change the time, press the green

button and move to the next

step. Otherwise, use the

buttons to change the time. Press the green

button to conﬁrm the time is correct and move to the next step. ‘SAVED’ will be

displayed for a moment to conﬁrm that any change has been saved to memory.

d. The remaining ON and OFF times (ON 2, OFF 2, ON 3, OFF 3) can be set by

using the

or buttons to change the time, then the green button

to conﬁrm the time is correct and move to the next step. If you do not wish to

change the time, just press the green

button to move directly to the next ON/

OFF time without making any changes.

e. After setting or reviewing the last off time, OFF 3, the message ‘COMPLETE’ will

be displayed to indicate the times for Monday have been set.

You now have a choice of how to set the programme for the next day:

Copying One Day’s Programme to Another Day (example Monday to Tuesday):

f. Whilst the day is showing Monday, Press the COPY DAY button. The message

‘COPY MON TO TUESDAY OK?’ will be displayed and the letters TUE will ﬂash

to indicate the programme for Monday can be copied to Tuesday.

g. To select a different day to copy to, press the NEXT DAY button to cycle through

the days. With each press of the NEXT DAY button the message will change to

indicate the new day you are copying to.

h. When the required day is indicated, press the green

button to conﬁrm, and

the message ‘MON COPIED’ will be displayed for a moment. The day into which

Mondays programme has been copied is now available to have its programme

edited.

Note: Once a day’s programme has been conﬁrmed in this way, it now becomes the

day whose programme is copied if the COPY DAY button is pressed again.

Programming a Different Day:

i. Press the NEXT DAY button to select the next day, which is displayed along the

top of the screen. The programme for that day can then be adjusted by following

steps b – e above. Programmes for the remaining days can be set in the same

way, using the NEXT DAY button to move to the next day.

PROGRAMMING YOUR ST9120C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell ST9120C Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info