10 63-2604
Programming Temperature Setpoints
1. Press Occupied Heat.
2. Press up ▲ or down ▼ until the
desired temperature is displayed.
3. Press Occupied Cool.
4. Press up ▲ or down ▼ until the
desired temperature is displayed.
5. Press Not Occupied Heat.
6. Press up ▲ or down ▼ until the
desired temperature is displayed.
7. Press Not Occupied Cool.
8. Press up ▲ or down ▼ until the
desired temperature is displayed.
9. Press Run Schedule.
Temperature Setpoint Overrides
IMPORTANT
— Setup determines Occupied override
duration.
— Default duration is three hours.
NOTE: To cancel Override and immediately
return to the program, press Run
Schedule.
T7770 Setpoint Knob
A T7770 setpoint knob can remotely adjust the
T7350 setpoint. This adjustment can be made
when the sensor is in override.
NOTES:
— During override, only occupied and
standby heat setpoints, and cool
setpoints are adjusted.
— The maximum adjustment is ±5°F.
