32571
7
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
I
12
SELECTING~HE DESIRED OPERATING
DISPLAY
(Optional)
. PRESENT TIME and ROQM TEMPERATURE keys
allow you to select c@tinuous display of time or
temperature. respectively.
•~ If neither key is pressed, T7400 will automatically
revert to a display of,,present time within 2
minutes of the last keypress.
PROBLEM INDICATORS
Loss of Stored Program
l
Blinking display of 3 dashes (- -) indicates 10%
of stored program. (Three steady dashes
represent an occupied or unoccupied time slot
that is not programmed.)
TEMPORARILY OVERRIDING THE
17400’s PROGRAM
(optional)
l
3 HOUR OCCUPIED key allows you to <activate
the temperature set points programmed for
your building’s occupied period for 3 hours.
l
‘Once pressed. the 3 HOUR OCCUPIED key can
be pressed again to cancel this command,
and return the T7400 to program control.
l
CONTINUOUS UNOCCUPIED key allows you to
activate the temperature set points
programmed for your building’s unoccupied
period for an indefinite time.
l
T7400 will default to Occupied mode and
control to respective Heat, Economizer. and
Cool set points of 68 F. 72 F, and 78 F until
thermostat is reprogrammed.
LOSS Of External Power
l
Blinking display of time or temperature
indicates loss of external power. The backup
botteiy maintains your time and temperature
schedule during the power loss.
l
Keyboard and red indicator lights exe
inoperative while the 77400 is on batteN power
Failure of Temperature Sensor
. While in the ROOM TEMP display mode. 0
display of (- “) indicates failure of wiring or
the temperature sensor.
. System will safely deenergize all heating and
cooling stages if cI sensor failure occurs.
l Once
pressed. the CONTINUOUS UNOCCUPIED
key must be pressed again to cancel this
command, and return the 17400 to piogiam
control.
l
The 3.HOUROCCUPIED and
CONTINUOUS UNOCCUPIED keys cannot be
used at the same tir&The last key pressed will
be in control.
l
Red indicators near the display window show
when 3 HOUR OCCUPIED and
CONTINUOUS UNOCCUPIED ovenide
functions are activated.
13
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell T7400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info