Bedienungsanleitung Honeywell T7525 (Seite 10 von 16) (Englisch)

32589

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

69-0860—1

T7525/T7526 THERMOSTAT TOUCHPAD

USING THE TOUCHPAD

Change the Program Setpoint Temperatures

You can change the setpoint temperature. Follow these steps:

1. From the Base screen, press the Options soft key. The screen displays the first

Options menu.

2. Press the More soft key. The screen displays the second Options menu.

3. Press the Climate Control soft key. The screen displays the Climate Control

menu.

4. Press the Settings and Schedules soft key. The screen displays the Settings

and Schedules menu.

5. Press the ▲ or ▼ soft key repeatedly until the desired selection (Weekday,

Saturday, or Sunday) displays.

6. Press the Temperature Settings soft key. The screen displays the current

settings for each period for the selected day.

NOTE: H refers to the heating setpoint; C refers to the cooling setpoint.

7. Press the soft key for the period to be changed. The screen displays the settings

for that period.

8. Press the Change Heat or Change Cool soft key until the desired setpoint type

(Heat or Cool) is displayed.

9. Press the ▲ or ▼ soft key repeatedly until the desired temperature setting

displays. The setpoint temperature range is 45° to 88°F (7° to 31°C).

10. Perform one of the following:

a. To accept the new setting, press the Select key or do not press a key for

one minute. The screen displays the current settings for the selected day.

b. To cancel the temperature entered in step 9, press the Back key within one

minute. The screen displays the current settings for the selected day.

NOTE: For systems using the T7525C/T7526C Thermostat Touchpads (auto

changeover), a minimum 3 degree F (2 degree C) deadband is

maintained between the heating and cooling setpoints. If either setpoint

is adjusted into the deadband, the other setpoint will automatically

change to maintain the minimum 3 degree F differential.

11. Repeat steps 7 through 10 for any other heating or cooling setpoints that need to

be changed.

12. Press the Select key. The screen displays the Settings and Schedules menu.

13. Repeat steps 4 through 11 for any other days that need to be changed.

14. Press the Select key repeatedly until the Base screen displays.

Base Screen

M8625A

Set: C: 80

Actual: 80

Rate: NORMAL

12:25PM Mon

Warmer

Cooler

Options

Select

Back

First Options Menu

M8626A

Options

Hold Temperature

Select

Back

Second Options Menu

M8627A

Options

Run Schedule

Climate Control

Present Time/Day

Select

Back

Climate Control Menu

M8628A

Climate Control

Settings and Schedules

Heat/Cool Equipment

Ventilation

Select

Back

Settings and Schedules Menu

M8629A

Settings and Schedules

Weekday

Temperature Settings

Day Schedule

Select

Back

Current Settings Screen

M4472

Sunday Settings

Wake H: 70˚ C: 78˚

Leave H: 62˚ C: 78˚

Return H: 70˚ C: 78˚

Sleep H: 64˚ C: 78˚

Select

Back

M8630A

Weekday-Leave Settings

Heat: 62

Change Cool

Select

Back

Current Period Settings Screen

(Change Cool Shown)

Step 1

Step 2

Step 3

Step 4

Step 5

Steps 6 & 7

Steps 8-10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell T7525 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info