652395
10
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
10
unit (0.0 mph will appear on the main unit’s wind window if the signal was sent and received successfully)
Aligning
This procedure must be performed after main unit has been powered and all remote weather sensors were received
successfully.
Manually point the wind direction vane to the north (use a compass or map if necessary).
Press the “SET” button located inside battery compartment (on the shorter side) with a paper clip. “SET” button selects
a new direction for NORTH and, when pressed repeatedly, alternates between the factory default NORTH and user
selected NORTH.
Watch for the next anemometer data transmission in the main unit’s wind window – the direction will be updated
Replace the battery compartment door and secure the screws.
Note: Repeat aligning procedure every time after changing the batteries.
Mounting
Mount the anemometer onto a vertical surface, using the fittings provided.
Placement tips:
The anemometer should be mounted in an open area with a free air flow; away from the nearby trees, buildings or
other structures.
For optimal performance, mount the anemometer at 33 feet (10meters) above the ground in unobstructed area.
Main Unit
The main unit measures pressure, indoor temperature, humidity, and receives atomic time data from the US Atomic Clock and
outdoor measurements from remote sensors. It should be placed indoors.
FEATURES
Time
Precise time and date set via RF signals from US Atomic clock
12 or 24 hour time format
Manual adjustment of time and date
Calendar displaying date with month and day in 6 languages English, German, French, Italian, Spanish and Dutch
Time Zones for over 100 pre-programmed world cities
Moon Phase calendar and historical data for the past and future 39 days
Dual crescendo alarms with programmable snooze
Weather
Weather forecast for the next 12 to 24 hour in seven large icons: Sunny, Partly Cloudy, Cloudy, Light Rain, Heavy
Rain, Unstable Weather and Snowy
Downloaded from www.Manualslib.com manuals search engine
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell TE831W-2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info