Bedienungsanleitung Honeywell TL8230A (Seite 2 von 2) (Englisch)

32761

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

TL8230A 69-1803 3/5/05 2/2

The thermostat has 3 operating modes.

Automatic - The temperature is set according to the energy-saving

schedule. To place the thermostat in this mode, press Mode/Ret until is

displayed. The current period setting is also displayed.

Temporary Bypass: If you modify the setpoint (by pressing the ,

or button) when the thermostat is in automatic mode, the new setpoint

will be used until the beginning of the next period.

Manual - The energy-saving schedule is not used. The temperature must

be set manually. To place the thermostat in this mode:

n Press Mode/Ret until is displayed.

o Set the temperature using the , or button.

Vacation - The thermostat is set to the Vacation temperature. Press

to place the thermostat in Vacation mode.

The schedule consists of 4 periods per day which represents a typical week

day. You can program the thermostat to skip the periods that do not apply to

your situation. For example, you can skip periods 2 and 3 for the weekend.

The Comfort ( ) temperature is used in periods 1 and 3 and the Economy

( ) temperature is used in periods 2 and 4. For example, when the period

changes from 1 to 2, the setpoint automatically changes from Comfort setting

( ) to Economy setting ( ).

You can have a different program for each day of the week; i.e., each period

can start at different time for each day of the week. The thermostat has been

programmed with the following schedule.

To modify the schedule:

n Press Pgm to access the programming mode. Period 1 is selected.

o Press Day to select the day to program (hold for 3 seconds to select the

entire week).

p Press Hour and Min to set the start time of the selected period, or press

Clear if you want to skip the period (--:-- is displayed).

q Press Pgm to select another period, or press Day to select another day.

Then repeat step 3.

r Press Mode/Ret to exit the programming mode.

NOTE: If no button is pressed for 60 seconds, the thermostat will automati-

cally exit the programming mode.

Use the following grid to record the new schedule.

Power supply: refer to the power base installation instructions

Display range: 32°F to 140°F (0°C to 60°C)

Setpoint range: 40°F to 86°F (5°C to 30°C)

Display resolution: 1°F (0.5°C)

Storage: -4°F to 120°F (-20°C to 50°C)

Heating cycle length: 15 minutes

Data backup: In the event of a power failure, most settings are saved. Only

the time must be re-adjusted if the power failure lasts more than 2 hours. The

thermostat will return to the mode that was active prior to the power failure.

Honeywell warrants this product, excluding battery, to be free from defects in the

workmanship or materials, under normal use and service, for a period of five (5)

years from the date of purchase by the consumer. If at any time during the warranty

period the product is determined to be defective or malfunctions, Honeywell shall

repair or replace it (at Honeywell's option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place from

which you purchased it, or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make

the determination whether the product should be returned to the following

address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr N,

Golden Valley, MN 55422, or whether a replacement product can be sent to

you.

This warranty does not cover removal or reinstallation costs. This warranty shall

not apply if it is shown by Honeywell that the defect or malfunction was caused by

damage which occurred while the product was in the possession of a consumer.

Honeywell's sole responsibility shall be to repair or replace the product within the

terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR

DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF

ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS

PRODUCT. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES

ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION

OF THIS WARRANTY. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which

vary from state to state.

If you have any questions concerning this warranty, please write Honeywell Cus-

tomer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-

1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell

Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9.

If you have any questions about the operation of your thermostat, please go to

www.honeywell.com/yourhome, or call Honeywell Customer Care toll-free

at 1-800-468-1502.

Operating Modes

Energy-saving Schedule

Period Description Associated temperature setting

Wake-up

Away from home

Return home

Sleep

Period Setting

MO TU WE TH FR SA SU

6:00

8:00

--:-- --:--

6:00

--:-- --:--

10:00

Period Setting MO TU WE TH FR SA SU

Technical Specifications

10.

;

Warranty

11.



Customer Assistance

12.

Printed in China

Honeywell TL8230A Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honeywell TL8230A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info