Bedienungsanleitung Hoonved AP43E (Seite 14 von 20) (Englisch)

637665

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Part 2: For the operator

2.1.h Reading the TEMPERATURES

At any time, with the machine switched ON or OFF, by

pressing the “SI” button you can read, in sequence,

the REAL and PROGRAMMED temperatures for the

water in the tank (t1) and in the boiler (t2).

- Pressing the “SI” button once, the message “t1” will

be displayed.

-Pressing the “SI” button a second time, the REAL

temperature of the water in the tank will be di-

splayed;

- Pressing the “SI” button a third time, the PROGRAM-

MED temperature of the water in the tank (for the

selected cycle) will be displayed;

- Pressing the “SI” button a fourth time, the message

“t2” will be displayed, indicating the boiler;

- Pressing the “SI” button a fth time, the REAL tem-

perature of the water in the boiler will be displayed;

- Pressing the “SI” button a sixth time, the PRO-

GRAMMED temperature of the water in the boiler

(for the selected cycle) will be displayed;

- Pressing the “SI” button a seventh time, the machine

will return to its initial status.

ATTENTION

The operations listed above CANNOT BE CARRIED OUT

DURING A CYCLE.

2.1.i Switching off the washer at the end of the day

At the end of the working day SWITCH OFF the washer

by pressing the “Q1” button.

Switch off the mains switch feeding the machine and

close the water supply taps.

For any repairs, contact only assistance centres

authorised by the manufacturer.

WARNINGS DURING OPERATION

1) Ensure that the washing temperature remains at

approx. 55-60°C;

2) Avoid immersing bare hands in the detergent-lled

water; if this should happen, rinse immediately and

thoroughly with running water;

3) Use only anti-foaming detergents, specics for use

in industrial machines;

4) Deactivate the machine in case of break-down or

malfunction.

For any repairs, contact only assistance centres autho-

rised by the manufacturer, and insist on the use of

original parts.

5) In no case should you change the the original for-

mulations without rst consulting an authorised

assistance centre;

6) When the machine is operating, do not open the door

too rapidly.

7) Wash tank water should be changed at least twice a

day or according to daily wash requirements.

Failure to follow the above warnings may compromise

the safety of the washing machine.

Useful advice for better washing results

Any unsatisfactory results from washing can be seen

when traces of dirt are left on dishes or other items;

any water marks may be caused by insufcient rins-

ing.

In this case, ensure that the rinsing nozzles (27) are

clean and that there is pressure in the water system.

If there are traces of waste, ensure that:

- The lters (22) (23) are clean;

- the water temperature is around 55-60°C;

- items are correctly positioned in the basket;

- the washing nozzles are clean (26);

- the wash arms (24) (25) rotate freely.

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoonved AP43E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoonved AP43E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info