Bedienungsanleitung Hoonved AP53E (Seite 12 von 20) (Englisch)

637667

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Part 1: General description and Safety devices

ENGLISH

Part 2: For the operator

2.1.c Cycle selection

Press the “S9” or CYCLE button to select the washing

cycle required from the 4 different cycles available

(SHORT, MEDIUM, LONG, INTENSIVE) and speci-

cally:

LC 1: SHORT CYCLE = * 152 sec.

LC 2: MEDIUM CYCLE = * 182 sec.

LC 3: LONG CYCLE = * 242 sec.

LC 4: INTENSIVE CYCLE = * 484 sec.

* without rinsing

2.1.d STARTING UP THE WASHING CYCLE

2.1.d.1 STARTING UP THE WASHING CYCLE

MANUALLY

To start up the cycle MANUALLY, press and hold the

START “S3” button for approx. 2 sec.

The LEDs of the display will light on in sequence and the

message shown on the display will blink (indicating that

the cycle is underway) at the LED for the selected cycle

will FLASH (e.g., LC2);

2.1.d.2 STARTING UP THE WASHING CYCLE AUTO-

MATICALLY

To start up the cycle AUTOMATICALLY (by opening and

closing the door), you will need to change the cycle

start-up mode. Press and hold the START “S3” button

until the pre-selected cycle LED remains CONSTAN-

TLY LIT (approx. 10 sec.) and the washing cycle will

then start up AUTOMATICALLY when the door is

closed.

2.1.e Instructions during the washing cycle

2.1.e.1 Display information

1) During washing, the tank temperature is indicated and

the display LEDs light up in sequence.

2) During drip-drying, only the display LEDs light up.

LC1LC2LC3LC4

I II III IIII

2.1 AP/FW E WASHING PHASES

2.1.a Machine OFF

When the machine is switched OFF the display will read

“OFF”:

2.1.b Switching on and preparing the machine

To switch the machine on, press the “Q1” button. The

LED representing the last cycle selected wil

FLASH (LC1 - LC2 - LC3 - LC4).

ATTENTION

When switching on for the rst time, the LC2 light

will FLASH.

First the boiler then the tank will begin to ll automatically.

While the machine is lling up the display will read

“F2”.

Once lled, the water-heating elements will be activated,

rst in the boiler then in the tank.

The display will give the tank temperature;

IMPORTANT

It is advisable, when rst switching on, to wait until

the display reads 55°C.

WASHING OPERATION

ATTENTION

When items to be washed are encrusted with burnt

on matter, or a long time has passed between use and

washing, it is essential to carry out a pre-wash soak

using a suitable softening agent.

The use of hand-washing products is to be avoided

as they could produce foam inside the machine.

IPlace the basket of items to be washed inside the machine,

having rst removed any solid waste.

Display cycle underway LED

LED for pre-selected cycle

LC1 LC2 LC3 LC4

I II III IIII

LC1 LC2 LC3 LC4

I II III IIII

Display cycle underway LED

LC1 LC2 LC3 LC4

I II III IIII

Q1 SI t1/t2 S9 S3

LC1LC2LC3LC4

I II III IIII

START

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoonved AP53E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoonved AP53E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info