Bedienungsanleitung Hoonved C60E (Seite 14 von 21) (Englisch)

637621

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

PARTICULAR RECOMMENDATIONS

FOR THE OPERATOR

- Do not operate the machine without having become fully

familiar with the contents of this manual and without having

acquired a comprehensive knowledge of the specic tech-

niques and machine controls.

- Check that the area in which the machine is to be installed is

compatible with the dimensions of the machine itself before

installing this latter.

- If this machine is a ”built in” type , pay attention that the

housing and the furnishings nearby are suitable ones ,

i.e. they have not to suffer from exposure to steam that

may come out from the machine during its functioning

and especially during the opening of the door at each

washing cycle

- Only use lifting and handling means that are suited to the

weight of the machine when this must be installed or removed

either completely or in part.

- Never allow unauthorized or unqualied personnel to start,

adjust, operate or repair the machine. Always refer to this

manual for the necessary operations.

- The mechanical parts and electrical/electronic components

situated inside the machine are protected by entirely closed

panels.

- Always ensure that the main switch has been set to the

“OFF” position before cleaning and/or servicing the machine.

This will disconnect the power source during the operator’s

intervention.

- The electrical powering system must be equipped with an

automatic release system prior to the main machine switch

and with a suitable grounding system that complies with all

the requisites established by industrial provisions for the

prevention of accidents.

- Always disconnect the power source if work must be carried

out on the main switch or in its vicinity.

- All inspections and maintenance operations requiring remo-

val of the safety guards are carried out under the complete

responsibility of the users.

These operations should therefore only be carried out by

specialized and authorized technical personnel.

- Make sure that none of the accident preventing safety de-

vices (barriers, guards, casings, microswitches, etc.) have

been tampered with and that they are all perfectly functional

before operating. These devices should be repaired if this is

not the case.

- Never remove the safety devices.

- To prevent personal risks, only use power tools that are

correctly connected to the grounding tap and that conform

to the national safety regulations.

- Never ever tamper with the electrical system or with any

other mechanism.

- Never ever use the hands or unsuitable instruments to locate

leaks from pipes. Air, uids under pressure or irritants could

cause serious damage to both persons and/or property.

- Never use the hands instead of adequate tools when operating

the machine.

- Never use the hands or other objects to stop moving parts.

- PAY THE UTMOST ATTENTION TO THE DATA PLATES

AFFIXED TO THE MACHINE WHENEVER WORKING ON

THIS OR IN THEIR NEAR VICINITY.

- The user is obliged to keep all the data plates and stickers

in a legible condition.

- Never climb on to the door or on to the top of the machine.

- It is essential for the user to replace all data plates and

stickers that may have deteriorated for any reason or that

are not clearly visible, ordering new ones from the Spares

Service.

- Contact the person in charge of maintenance in the event of

malfunctions or damage to the machine components without

proceeding with further repairs.

- It is absolutely forbidden for anyone to use the machine for

purposes other than those explicitly established and docu-

mented. The machine must always be used in the ways, times

and places dictated by common sense and the laws in force

in each country, even when there are no specic provisions

to govern the sector in the particular country of use.

- The manufacturer declines all responsibility for accidents

or damage to either persons or property as may arise

following failure to comply with either the relative safety

provisions or the instructions herein.

- These instructions, together with the provisions gover-

ning machine installation and electrical connections form

an integral part of the Accident Preventing Industrial

regulations in force in each individual country.

- THESE SAFETY PROVISIONS INTEGRATE AND DO NOT

SUBSTITUTE THE SAFETY PROVISIONS LOCALLY IN

FORCE.

- NEVER ever make hurried or inaccurate repairs that

could jeopardize the correct operation of the machine.

- ALWAYS ASK FOR HELP FROM SPECIALIZED PERSON-

NEL IN CASE OF DOUBT.

- ANY TAMPERING BY THE USER RELIEVES THE MA-

NUFACTURER FROM ALL LIABILITY, THE USER BEING

IN THIS CASE SOLELY RESPONSIBLE TOWARDS THE

COMPETENT ACCIDENT PREVENTION AUTHORITIES.

- The machine must not be used by people (chidren inclu-

ded) with reduced physical, sensory or mental abilities,

with lack of experience or acquaintance, unless they

could have a supervision or instruction concerning

the use of the machine, through the intermediation of a

person responsible for their safety.

- It is forbidden to clean the machine with water jets.

ENGLISH

Traslation from the original instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoonved C60E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoonved C60E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info