Bedienungsanleitung Hoonved SP 40 D (Seite 15 von 19) (Englisch)

637657

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

ENGLISH

4.2 Daily cleaning (Fig. 10)

ATTENTION

Daily operations to carry out when work has ended, with

the machine off, the main circuit-breaker disconnected,

the water cocks off and the washing tub empty.

1. Thoroughly clean the inside parts of the machine.

2. Remove the filter (22) from the bottom of the machine

by releasing the overflow (21).

3. Remove the suction protection (23) (only for model C

43-48-53/SP 35-40-45).

4. Wash the filters under running water and fit them

correctly back in their housings.

ATTENTION

The filter (36) extraction and cleaning

can be also done with full tank .

ATTENTION

Frequently check and clean the spraying units, removing

them from their housings and eliminating any dirt and

fouling. The frequency with which this operation must be

carried out depends on the quantity of dirt or on the

unsatisfactory washing results. Never use corrosive

products like sodium hypochlorite (bleach) or hydrochloric

acid, wire wool or steel brushes to clean either the inside

or outside parts of the machine.

5. PREVENTION MAINTENANCE (Fig. 10)

ATTENTION

The preventive maintenance operations must be carried

out with the machine off, the main circuit-breaker

disconnected, the water delivery cocks off and the washing

tub empty.

5.1 Checking and cleaning the spray arms and

nozzles (Fig. 10)

Periodically check to make sure that the lower washing

arm (24) and rinsing arm (25) and their relative nozzles are

not clogged.

Cleaning the lower unit (for models 35-43-48 C-CD

SPB 35 - 35-40 - SP- SPD):

1. Unscrew the ring nut (26) and lift the arm (24).

2. Wash the washing and rinsing rods.

If the nozzles (27) are clogged, unscrew them to

demount and clean, taking care to prevent the shape of

the nozzle from being deformed. After cleaning, fit the

nozzles exactly back in their original positions.

3. Remount all parts by complying with the above

instructions in reverse.

Cleaning the lower unit (for models 53-60 C-CD

45-50 SP-SPD):

1. Unscrew the central pin (28) removing rod (25) and

unscrew the ring nut (29) and rod (24).

2. Wash the washing and rinsing rods.

If there are clogged nozzles (30), demount them (only

the rinsing rods) and clean them with a steel rod, taking

care to prevent the nozzles themselves from being

deformed. Now fit them back in place in exactly their

original positions.

3. Remount all parts, proceeding in reverse.

Cleaning the lower unit (for models 43-48 CR-CRD

36-41 SPR SPRD-C 6-SP 5-C 6 D-SP 5 D):

1. Unscrew the plug (31) and then remove the water

baffle plate (32) and clean it.

2. Clean the washing (33) and rinsing nozzles (34).

3. Fit all parts back in place proceeding in reverse. Take

particular care to fit the water baffle plate back in the

correct direction (32).

5.2 Weekly regenerating operations

(for mod. CD-CRD-SP-SPD-C 6 D-SP 5 D only) (Fig.

10)

1. Switch off the machine and proceed with daily

maintenance as indicated in the relative section.

2. Unscrew the plug (35) from the salt reservoir and pour

in 1 Kg of coarse kitchen salt.

3. Fully retighten the plug (35) to make sure that the

reservoir is hermetically sealed.

6. TEMPORARY INACTIVITY

If the machine is to remain inactive for a certain period of

time, disconnect the electrical power source and turn off

the water delivery cocks. Leave the tub door open.

• Drain off the water from the boiler by placing a vessel

under it and unscrewing the relative drain screw.

Wait until the boiler has emptied, then fit the screw back

in place.

7. DEMOLITION

When the machine must be scrapped, first drain the water

from the tub and boiler as indicated in the previous points

and disconnect the machine from the water and electricity

mains. Now dispose of the components as prescribed by

the current laws in force.

The instructions, drawings, tables and everything

else in this manual are of a confidential technical

nature. For this reason, none of the information may

be either completely or partially duplicated or disclosed

to third parties without prior written authorization

from HOONVED s.r.l. which is the sole proprietor and

which reserves the right to make any modifications as

may be considered necessary without advance

warning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoonved SP 40 D Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoonved SP 40 D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info