Bedienungsanleitung Hoonved SP 40 (Seite 12 von 19) (Englisch)

637656

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

1.1 GENERAL DESCRIPTION

Single-walled construction in 18/10 stainless steel with

fine satin finish.

All controls and electrical parts can be easily accessed.

The feet are adjustable in height and the rinsing agent

dispenser is built into the machine.

There is a built-in decalficier for CD-CRD-SPD-SPRD

models. The washing rods and filters can be easily removed

for maintenance and routine cleaning.

All models are equipped with a safety microswitch on the

door. The heating elements are made of rustproof incoloy

steel.

All models are supplied with an adequate number of

baskets.

Optimum loading capacity with 280 mm opening for model

C 43 and up to 320 mm for model C 60.

1.2 TYPE OF USE AND IMPROPER USE

These machines have been designed and built to wash

crockery placed in special baskets and using detergent

and rinsing agent.

• Permitted crockery: glasses, teacups, coffee cups,

saucers, cutlery made of materials suitable for

dishwashers and of a size able to fit into the basket and

machine.

• Use of specific detergents and rinsing agents for

industrial purposes normally available in the shops is

permitted.

ATTENTION

Any improper use of the machine relieves the manufacturer

from all and every responsibility for accidents or damage

to persons and property, also voiding all conditions of

guarantee.

1.3 TRANSPORT, SHIPMENT AND

STORAGE (Fig. 2)

- The machine is normally shipped in a cardboard box

closed by straps.

-When transporting the packed machine, use a lift truck

or transpallet, positioning the box on the relative forks.

ATTENTION

The machine must be sheltered from the weather when

shipped and stored.

1.4 INSPECTIONS ON ARRIVAL

When the machine arrives, check that the packaging is in

a perfect condition and that there is no visible damage.

If everything is in order, remove the packaging (unless

other instructions have been received from the

manufacturer) and check that the machine is free from

damage caused by transport.

Now check whether there has been any damage to the

structure, crushing or breakages.

If damage or imperfections are discovered:

1 - Immediately notify the haulage contractor both by

phone and in writing by registered letter with return

receipt attached;

2 - Inform the manufacturer by registered letter (with return

receipt attached).

IMPORTANT

Notification of damage or faults must be immediate, in any

case within 3 days from the date on which the machine is

received.

1.5 UNPACKING (Figs 2-3-4)

Proceed in the following way in order to remove the

packing:

1. Cut the straps (7) that hold the cardboard in place.

2. Remove the box (8) by lifting it upwards.

3. Remove the protective film from the machine.

4. Remove the machine from the base by lifting it from the

lower part of the casing (Fig. 4).

5. All packing must be collected and not left within children’s

reach since it could become a source of danger. The

packing can be disposed of in the same way as solid

urban waste.

ATTENTION

Once the machine has been unpacked, NEVER ever use

the box containing the electrical components for lifting

purposes.

Lift the machine by raising it from the lower part of the

casing. Set it on the forks of a truck when transporting.

1.6 MACHINE IDENTIFICATION (Fig. 5)

- The serial number and machine data are stamped on

the data plate (9) affixed to the rear part of the machine

itself.

IMPORTANT

Always state the model and serial number of the machine

when requesting technical assistance or ordering spare

parts.

1.7 DESCRIPTION OF THE SAFETY

DEVICES

• Models C-CR-CD-CRD-SP-SPD-SPB-SPR-SPRD are

equipped with a safety microswitch that blocks the

washing pump if the tub access door is accidentally

opened.

• The electrical parts are enclosed by panels locked by

screws.

• The machine is fitted with an equipotential ground

conductor.

• Safety overflow to prevent water from spilling.

1.8 REFERENCE STANDARD

• The machine and its safety devices has been built in

compliance with the following standards:

• Essential safety requisites established by Directive 73/

23 EEC Annex 1 modified by Directive 93/68 EEC,

directive 89/336 EEC.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoonved SP 40 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoonved SP 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info