705451

Hoover ATDH11A2TKERXM-S Seite 29

29
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
FR
7. CONTROLES ET VOYANTS
7
6
5
4
3
2
1
BD
E
F
A
C
A - Sélecteur de programme - Vous pouvez faire
tourner la molette dans les deux sens pour sélec-
tionner le programme de séchage voulu. Pour
effacer les sélections ou éteindre le sèche-linge,
faites tourner la molette sur OFF.
B - Affichage numérique - L'afficheur montre le
temps de séchage restant, le temps différé si
vous avez sélectionné le démarrage différé et
d'autres informations sur le réglage.
C - Touches -
1. Touche de démarrage/pause
Pour démarrer le programme sélectionné et/ou
l'interrompre.
2. Touche de départ différé
Elle permet de différer le démarrage du program-
me de 1 à 24 heures par intervalles d'1 heure.
L'afficheur montre le retard sélectionné.
Après avoir appuyé sur la touche START, le
temps affiché diminue d'heure en heure.
SI vous ouvrez le hublot alors que le redémarrage
différé est configuré, lorsque vous refermez le
hublot, appuyez à nouveau pour reprendre le
décompte.
3. Touche de sélection du séchage
Elle permet de configurer l'option de changement
du niveau de séchage voulu jusqu'à 5 minutes
après le démarrage du cycle.
Prêt au repassage: Laisse les vêtements
légèrement humides pour faciliter le
repassage.
Séchage cintre: Le vêtement est prêt à être
suspendu
Séchage armoire: Pour le linge qui peut être
rangé directement.
Séchage extra: Pour avoir des vêtements
parfaitement secs, idéal pour la pleine charge.
Cet appareil est équipé d'une fonction de gestion
du séchage. Pendant les cycles automatiques,
chaque niveau de séchage intermédiaire, avant
d'atteindre le niveau sélectionné, est indiqué par
le clignotement du voyant lumineux correspon-
dant au degré de sé
chage atteint. En cas
d'incompatibilité, tous les voyants LED clignotent
3 fois rapidement.
Elle permet de passer d'un programme automati-
que au programme RAPIDE, jusqu'à 3 minutes
après le démarrage du cycle. La pression pro-
gressive augmente la durée (30-45.59 minutes).
Après cette sélection pour rétablir le fonctionne-
ment du séchage automatique vous devez éteindre
le sèche-linge. En cas d'incompatibilité, tous les
voyants LED clignotent 3 fois rapidement.
Vous pouvez transformer un cycle d'automatique
à programmé, jusqu'à 3 minutes après le démar-
rage du cycle.
La pression progressive augmente la durée par
intervalles de 10 minutes. Après cette sélection
pour rétablir le fonctionnement du séchage
automatique vous devez éteindre le sèche-linge.
En cas d'incompatibilité, tous les voyants LED
clignotent 3 fois rapidement.
5. Anti-froissage
L'option permet d'activer le mouvement anti-
froissage du pré-
cycle du tambour lorsque le
retard est activé et à la fin du cycle de séchage.
Elle est activée toutes les 10 minutes, jusqu'à
6 heures après la fin du cycle de séchage. Pour
arrêter les mouvemen
ts placez la molette sur
OFF. Utile lorsqu'il est impossible de retirer
immédiatement le linge.
6. Mémoire
L'option permet de mémoriser les options confi-
gurées dans un cycle.
MEMOIRE:
lorsque le cycle est en marche
appuyez sur la touche mémoire pendant trois
secondes.. Le voyant lumineux mémoire clignote
trois fois et mémorise les options configurées
liées au cycle sélectionné dans la plage.
RAPPEL:
après avoir sélectionné le cycle
appuyez sur la touche mémoire pour rappeler les
options mémorisées (par le cycle).
7. Verrou
Cette fonction permet de verrouiller les change-
ments indésirables des options configurées en
façade, pendant la phase de séchage.
Activation/Désactivation
: appuyez en même
-
des. L'afficheur montre le signe LOC Déver-
rouillage de l'option, l'afficheur montre le signe
Unl, une seule fois.
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic dr
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: p 3 and
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4 Rapids Button / Time ycle selection
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: p 3 and 4
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4 Rapids Button / Time Cycle selection
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the opt
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
Rapids Button / Time C
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push and 4
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: p and 4
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
Rapids Button
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored opti
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra
-
dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push and 4
simultaneously for two seconds. The sign "LOC"
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
Si pulsas esta tecla, es posible reducir la
velocidad máxima, y si lo deseas, puedes
cancelar el ciclo de centrifugado.
velocidad de giro cancelada.
Si la etiqueta no proporciona información
específica, significa que se puede usar el
centrifugado máximo previsto por el
programa.
Para reactivar el ciclo de centrifugado,
pulsa la tecla hasta alcanzar la velocidad
de centrifugado deseada.
Es posible modificar la velocidad de
centrifugado sin detener la lavadora.
Esta opción le permite cambiar la
temperatura de los ciclos de lavado.
lavado en frío.
encima del máximo permitido para cada
programa, con el fin de proteger los
tejidos.
Esta opción le permite pre-programar el
ciclo de lavado para iniciarlo con una
posterioridad de hasta 24 horas.
Para diferir el inicio del ciclo:
- Introduzca el programa deseado.
- Pulse el botón una vez para activarlo
(h00 aparece en la pantalla) y luego
pulse de nuevo para fijar un intervalo de
1 hora (h01 aparece en la pantalla). El
retardo preestablecido aumenta en 1
hora cada vez que se pulsa el botón,
hasta que aparezca h24 en la pantalla,
y en ese momento, al pulsar el botón de
nuevo, se restablecerá el inicio diferido
a cero
-
Confirme pulsando la tecla INICIO/PAUSA
(
la luz en la pantalla comienza a
parpadear). La cuenta atrás comienza y
cuando termina el programa se iniciará
automáticamente.
Es posible cancelar el inicio diferido
girando el selector de programas a la
Si hay alguna interrupción en el
lavadora está en funcionamiento, una
seleccionado y, cuando se restablezca la
energía, continúa donde lo dejó.
Las opciones y funciones se debe
seleccionar antes de pulsar la tecla
INICIO/PAUSA.
Si se selecciona una opción que no es
compatible con el programa elegido
entonces el indicador opción parpadea
primero y luego se apaga.
Tecla SELECCIÓN CENTRIFUGADO
Para evitar dañar los tejidos, no es
posible aumentar la velocidad por
encima del máximo permitido para
cada programa.
Una cantidad excesiva de detergente
puede provocar un exceso de
espuma. Si el electrodoméstico
detecta la presencia de una cantidad
excesiva de espuma, puede descartar
la fase de centrifugado, o extender la
duración del programa y aumentar el
consumo de agua.
La lavadora está equipada con un
ciclo de centrifugado si la carga está
desequilibrada. Esto reduce el ruido y
la vibración en la lavadora, y prolonga
la vida de la lavadora.
Tecla SELECCIÓN TEMPERATURA
Tecla INICIO DIFERIDO
29
FR
secontemps sur les touches 3 et 4 pendant 2
Sélection cycle durée4.Touche rapide/
… 29 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hoover ATDH11A2TKERXM-S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info