705451

Hoover ATDH11A2TKERXM-S Seite 46

46
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
DE
7. BEDIENELEMENTE UND
ANZEIGEN
7
6
5
4
3
2
1
BD
E
F
A
C
A - Programmauswahl - Über den Drehschalter
können in beiden Richtungen Trockenprogramme
ausgewählt werden. Um die Auswahl
abzubrechen oder den Trockner auszuschalten,
stellen Sie den Drehschalter auf AUS.
B - Zeit-Display - Das Display zeigt die verbleibende
Zeit bis zum Ende des Trockenvorgangs, die ver-
schobene Zeit bei einem verzögerten Start und andere
Benachrichtigungen an.
C - Tasten -
1. Taste Start/Pause
Startet das ausgewählte Programm oder bricht es ab.
2. Taste Startverzögerung
Ermöglicht eine Verzögerung des Programmstarts
von einer bis zu 24 Stunden im Ein-Stundentakt.
Die ausgewählte Verzögerung wird im Display
angezeigt. Nachdem die START-Taste gedrückt
wurde, verringert sich die angezeigte Zeit jede
Stunde. Wenn die Türe nach einem verzögerten
Start geöffnet wird, nach dem Schließen erneut
„Start“ drücken, damit der Timer wieder angeht.
3. Auswahltaste Trockenprogramm
Über diese Taste kann der gewünschte
Trockengrad bis zu fünf Minuten nach dem
Programmstart eingestellt werden:
Mangeltrocken: Die Wäsche ist noch leicht
feucht, was das Bügeln erleichtert.
Bügeltrocken: Die Wäsche kann auf einen
Bügel gehängt werden.
Schranktrocken: Die Wäsche kann direkt in
den Schrank gelegt werden.
Extratrocken: Die Wäsche ist vollständig trocken;
ideales Programm für volle Waschladung.
Dieses Gerät verfügt über eine Trockenmanager-
Funktion. Bei automatischen Trockenvorgängen
wird jede Zwischenstufe vor dem Erreichen des
ausgewählten
Trockengrades durch ein Blinken
angezeigt. Falls etwas nicht stimmt, blinken alle
LEDs dreimal schnell hintereinander.
4. Schnelltaste/Zeitauswahl
Bis zu drei Minuten nach dem Programmstart
können automatische Programme in das
Schnellprogramm (RAPID) umgeschaltet werden.
Durch jedes weitere Drücken wird die
Trockendauer erhöht (30-45-59 Minuten).
Ist diese Auswahl getroffen und soll die
automatische Trocknung wieder eingestellt
werden, muss der Trockner ausgeschaltet
werden. Falls etwas nicht stimmt, blinken alle
LEDs dreimal schnell hintereinander.
Bis zu drei Minuten nach dem Programmstart
können automatische Programme in
programmierte geändert werden.
Durch jedes weitere Drücken wird die
Trockendauer im 10-Minuten-Intervall erhöht. Ist
diese Auswahl ge
troffen und soll die
automatische Trocknung wieder eingestellt
werden, muss der Trockner ausgeschaltet
werden. Falls etwas nicht stimmt, blinken alle
LEDs dreimal schnell hintereinander.
5. Knitterfrei
Mit dieser Option wird bei Auswahl einer Zeitver-
zögerung und am Ende des Trockenvorgangs die
Trommel eingeschaltet, damit die Wäsche
knitterfrei bleibt. Sie wird bis zu sechs Stunden
nach Ende des Trockenvorgangs alle 10 Minuten
eingeschaltet. Um die Drehung der Trommel
auszuschalten, stellen Sie den Drehschalter
AUS. Diese Funktion ist vor allem dann nützlich,
wenn die Wäsche nicht sofort aus dem Trockner
genommen werden kann.
6. Speicher
Über diese Taste können die eingestellten
Trockenoptionen gespeichert werden.
SPEICHER:
Wenn der Trockenvorgang läuft,
halten Sie die Taste „Speicher“ drei Sekunden
lang gedrückt. Die „Speicher“-Kontrollleuchte
blinkt drei
mal, und die Optionen für das
ausgewählte Programm werden gespeichert.
SEICHERAUFRUF: Drücken Sie nach der Pro-
grammauswahl die Taste „Speicher“, um die
gespeicherten Optionen (und nicht das
Programm) aufzurufen.
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger: To get garment ready to be hang.
Dry wardrobe
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
7. CONTROLS AND INDICATORS
7
6
5
4
3
2
1
A - Programme Selector - Rotating the knob in
both directions it's possible to select the desired
drying program. To cancel the selections or
switch off the dryer rotate the knob on OFF.
B - Display Digit - The display shows the
remaining time for drying, the postponed time in
case of delayed start selection and other
notifications setting.
C - Buttons -
1.Start/Pause Button
To start the selected program and/or suspend it.
This appliances is equipped with Drying Manager
Function. On automatic cycles, each level of
intermediate drying, prior to the reaching the
selected one, is indicated by flashing the light
indicator corresponding to the degree of drying
reached. In case of incompatibility, all LEDs flash
quickly for 3 times.
4.Rapids Button / Time Cycle selection
It's possible switch some automatic programs to
RAPID programs, up to 3 minutes after t
he start of
the cycle. The progressive pressure increases
the time (30-45-59 minutes).
After this selection to reset the automatic drying
functioning is necessary to switch off the dryer.
In case of incompatibility, all LEDs flash quickly
for 3 times.
It's possible transform a cycle from automatic to
programmed, up to 3 minutes after the start of
the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
5.Anti Crease
This option allows to activate an anti-creases
movement of the drum pre cycle in case of
activation of the delay and at the end of drying
cycle. It is activated every 10 minutes, up to 6
hours after the end of the drying cycle. To stop
the movements set the knob to OFF. Useful
when it's not possible to remove immediately the
laundry.
6.Memory
This option allows you to store the options set on
a cycle.
MEMORY: when the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
RECALL: after the selection of the cycle push
the button "memory" for recall the stored options
(not the cycle).
7. Keylock
This function allows to block unwanted changes
of the set options on the bezel, during drying
phase.
Activation/Inactivation: push 3 and 4 buttons
simultaneously for two seconds. The sign "LOC"
appears on the display. Unlocking the option, on
the display appears the sign "Unl", only once.
B
C
D
E
F
12
2.Delay Start Button
It allows to delay the start of the program from 1
to 24 hours in 1-hour intervals. The delay
selected is shown on the display.
After pressing the START button the time
showed decrease hour after hour.
Opening of the porthole with delayed start set,
after re-
to resume the counting.
3.Drying Selection Button
It allows to set the desired dryness level editable
option up to 5 minutes after the starting of the cycle:
Ready to Iron: It leaves the garments slightly wet
to facilitate ironing.
Dry Hanger
Dry wardrobe: For laundry that can be directly
stored.
Extra-dry: To get completely dry garments,
ideal for full load.
A
closing the porthole, press START again
Si pulsas esta tecla, es posible reducir la
velocidad máxima, y si lo deseas, puedes
cancelar el ciclo de centrifugado.
velocidad de giro cancelada.
Si la etiqueta no proporciona información
específica, significa que se puede usar el
centrifugado máximo previsto por el
programa.
Para reactivar el ciclo de centrifugado,
pulsa la tecla hasta alcanzar la velocidad
de centrifugado deseada.
Es posible modificar la velocidad de
centrifugado sin detener la lavadora.
Esta opción le permite cambiar la
temperatura de los ciclos de lavado.
lavado en frío.
No es posible elevar la temperatura por
encima del máximo permitido para cada
programa, con el fin de proteger los
tejidos.
Esta opción le permite pre-programar el
ciclo de lavado para iniciarlo con una
posterioridad de hasta 24 horas.
Para diferir el inicio del ciclo:
- Introduzca el programa deseado.
- Pulse el botón una vez para activarlo
(h00 aparece en la pantalla) y luego
pulse de nuevo para fijar un intervalo de
1 hora (h01 aparece en la pantalla). El
retardo preestablecido aumenta en 1
hora cada vez que se pulsa el botón,
hasta que aparezca h24 en la pantalla,
y en ese momento, al pulsar el botón de
nuevo, se restablecerá el inicio diferido
a cero
-
Confirme pulsando la tecla INICIO/PAUSA
(
la luz en la pantalla comienza a
parpadear). La cuenta atrás comienza y
cuando termina el programa se iniciará
automáticamente.
Es posible cancelar el inicio diferido
girando el selector de programas a la
posición APAGADO.
Si hay alguna interrupción en el
suministro de energía mientras la
lavadora está en funcionamiento, una
memoria especial almacena el programa
seleccionado y, cuando se restablezca la
energía, continúa donde lo dejó.
Las opciones y funciones se debe
seleccionar antes de pulsar la tecla
INICIO/PAUSA.
Si se selecciona una opción que no es
compatible con el programa elegido
entonces el indicador opción parpadea
primero y luego se apaga.
Tecla SELECCIÓN CENTRIFUGADO
Para evitar dañar los tejidos, no es
posible aumentar la velocidad por
encima del máximo permitido para
cada programa.
Una cantidad excesiva de detergente
puede provocar un exceso de
espuma. Si el electrodoméstico
detecta la presencia de una cantidad
excesiva de espuma, puede descartar
la fase de centrifugado, o extender la
duración del programa y aumentar el
consumo de agua.
La lavadora está equipada con un
dispositivo electrónico que descarta el
ciclo de centrifugado si la carga está
desequilibrada. Esto reduce el ruido y
la vibración en la lavadora, y prolonga
la vida de la lavadora.
Tecla SELECCIÓN TEMPERATURA
Tecla INICIO DIFERIDO
46
… 46 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hoover ATDH11A2TKERXM-S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info