! After turning the appliance on, you will
be able to select the desired programme
by pressing the relevant icon that will
light up. The display will show the
description and the relevant parameters.
! To start the selected cycle with the preset
parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
! Moreover, If you want to modify the
chosen program, press the desired
options buttons, modify the default
parameters and then press
START/PAUSE button to start the cycle.
! Press to start the set cycle.
CYCLE DURATION
! When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
! Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
! The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
ADD OR REMOVE ITEMS AFTER THE
PROGRAMME HAS STARTED (PAUSE)
! Press START/PAUSE (the display shows
PAUSE).
! After adding or removing items, close the
porthole and press START/PAUSE (the
programme will resume from when it was
interrupted).
CANCELLING THE SET PROGRAMME
! To cancel the programme, press the
ON/OFF button for about 2 seconds until
the display switches off.
! By this option you can change
thetemperature of the washing cycles.
! By this option you can reduce the
maximum spin speed for the set
programme, until it is completely
excluded.
! If the label does not show any
instructions, you can spin to the
maximum speed set for the programme.
