Bedienungsanleitung Hoover Dual Power Carpet Cleaner (Seite 15 von 26) (Englisch, Französisch)

594426

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

IMPORTANT

If the sound of the motor changes to a high

pitch, this indicates the dirty water tank is full

and must be emptied.

IMPORTANT

To avoid saturating carpet, do not use more

than 4 wet strokes over one area. Always end

with dry strokes.

For best cleaning results, Hoover recommends to

rinse the carpet with water only. This will remove

residual carpet cleaning solution from your

carpets. To rinse with water only, fill Solution Tank

with water and repeat step 7.

For heavily soiled areas, repeat cleaning process.

Avoid saturating carpet.

NOTE: It is best to alternate wet and dry strokes

as described above.

3.11 Wrap cord around hooks for convenient

storage. Attach the plug end to the cord.

Your carpet washer is equipped with a shut off float

within your dirty water tank. When the dirty water

tank becomes full, the float will rise, shutting off the

air flow thru the nozzle.

Once the float is activated, empty the dirty water

tank. If the dirty water tank does not appear full, turn

the power switch off and wait for the float to settle and

reset. If the float repeatedly shuts off the suction,

empty the dirty water tank. For best results, use only

Hoover

brand cleaning solution. Other Solutions

may generate excessive foam which will cause the

float to rise prematurely and shut off the suction. A

higher concentration of shampoo may cause

excessive foaming.

How to Empty

3.12 Grasp dirty water tank handle and push latch to

release.

3.13 To empty dirty water tank, unplug the Quick

Spout Pour Cap (A), rotate it away from drain hole

and empty the Tank.

3.14 Replace Quick Spout Pour Cap after cleaning.

Failure to do so will result in poor suction performance.

DIRTY WATER TANK

3.12

3.14

3.15

3.13

Do not store cleaner with solution in Clean Water

Solution Tank or dirty water in Dirty Water Tank.

Mineral deposits and mildew can form which will

affect the performance of your carpet cleaner.

IMPORTANT

Be sure to remove any debris that has

accumulated in the screen above the float. If the

screen becomes clogged, this may reduce the

performance of your cleaner.

IMPORTANT

3.15 Insert dirty water tank back into the cleaner.

3.10 Keep nozzle flat on floor for both forward and

reverse strokes.

For best cleaning results and to aid in faster

drying of carpet, end with more dry strokes.

(Continue using dry strokes until little water is

visible passing through the Dirty Water Tank lid.)

NOTE: Empty Dirty Water Tank when the motor

sound becomes higher pitched and there is a loss

in suction (see “Automatic shut-off”)

CAUTION

Water will drip from the brushes and underside

of the product after use and may puddle. To

avoid damage to wood and laminate flooring

and to avoid potential slip hazard, after use (a)

do not leave the product on wood and laminate

surfaces and remove to a hard surface and (b)

place unit on obsorbant material (such as a

towel) to soak up drips.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover Dual Power Carpet Cleaner Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info