Bedienungsanleitung Hoover FreespaceEvo FV10 (Seite 5 von 66) (Alle Sprachen)

594368

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

To remove the exhaust lter:

1. Unlock the door by rotating the door along arrows indicated [21].

2. Remove the lter pack from the recess [22].

Gently tap and wash the lter packs using hand warm water [23]. Remove excess water from the

lters with a dry cloth and leave to dry fully before re-using. Reassemble lter packs once fully

dry and ret to the cleaner.

Remember: Do not use hot water or detergents. In the unlikely event of the lters becoming

damaged, t a Genuine Hoover consumable. Do not try and use the product without a dust bag

or lter tted.

Cleaning the permanent dust bag (depending on model)

To maintain optimum performance we recommend that you wash the permanent bag after

every 5 full bags. Empty the contents of the Bag into a bin, wash the Bag under handwarm

water, remove excess water with a dry cloth and leave to dry fully before replacing.

Removing a Blockage From The System

If the bag check indicator is red:

1. Check if the bag is full. If so refer to ‘Replacing The Dust Bag’.

2. If it is not full, then;

A Do the lters need cleaning? If so refer to ‘Cleaning the Filter’.

B. Check if there is any other blockage in the system - Use a rod or a pole to remove any

blockage from the telescopic tube or exible hose.

C. Check for and clear any blockage in the Nozzle.

Warning - The bag check indicator will turn red if the cleaner is used when full, if there is a

blockage or if the lters are dirty. If the cleaner is used for a signicant period of time with the

bag check indicator is red, a thermal cut out will switch the cleaner o to prevent overheating.

The bag check indicator turn green once the cleaner has switched o to signal that the

thermal cut out has been activated. If this should happen, switch the cleaner o, unplug and

correct the fault. It will take about 45 minutes for the cut out to automatically reset.

ACCESSORIES

To obtain the best performance and energy eciency

it is recommended that the correct

nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams

by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard oor.

A nozzle type HF is suitable for use only on hard oor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended for

occasional use only.

It is important to note that this vacuum cleaner is supplied with an Energy Label as required by

European Regulation (EU) 665/2013.

If the label shows a red prohibition circle on the left covering the carpet symbol, then this

indicates that the vacuum cleaner is not suitable use on carpets.

If the label shows a red prohibition circle on the right covering the hard oor symbol, then this

indicates that the vacuum cleaner is not suitable for use on hard oors.

NOTE: Dust pick up ability carpet, dust pick up ability hard oor, and energy eciency in

accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.

Please see the model specication on the packaging label for inclusion of accessories to

individual models.

All accessories can be tted to the hose handle or the end of the telescopic tube.

Crevice Tool – For corners and hard to reach areas. Remove the Crevice tool from the accessories

holder [24] and t to the hose handle [25] or telescopic tube.

Dusting Brush – For bookshelves, frames, keyboards and other delicate areas. Remove the

dusting brush from the accessories holder [24] and t to the crevice tool then t to the hose

handle [25] or telescopic tube.

Parquet Nozzle* – For parquet oors and other delicate oors.[1S]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs

removal. [1T]

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen

removal. [1U]

Grand Turbo Nozzle* –

Use the Grand Turbo Nozzle for deep cleaning on carpets. [1V]

IMPORTANT: Do not use the Grand Turbo Nozzle or Mini Turbo Nozzles on rugs with long

fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary

while the brush is rotating.

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before calling

your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another electrical

appliance.

• Is the Bag over-filled? Please refer to ‘Cleaner Maintenance’.

• Is the filter blocked? Please refer to ‘Cleaner Maintenance’.

• Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.

• Has the cleaner overheated? If so, it will take approximately 45 minutes to automatically reset.

IMPORTANT INFORMATION

Hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover

dealer or direct from Hoover. When ordering parts always quote your model number.

Microber Bag H71 35601069

Pre-Motor Filter S107 35601057

Exhaust Microlter T102 35601056

Complete Flexible Hose D122 35601055

Carpet & Floor Smart Nozzle G202EE 35601595

Carpet & Floor Smart Nozzle G217SE 35601610

*Certain Models Only ** Certain models only, nozzles may vary according to model

Hoover FreespaceEvo FV10 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hoover FreespaceEvo FV10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info