Bedienungsanleitung Hoover HDP 2D1145X (Seite 20 von 27) (Englisch)

705814

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

It is recommend that you run a wash cycle with the

dishwasher empty and then remove the plug from the

socket, turn off the water supply and leave the door of

the appliance slightly open. This will help the door

seals to last longer and prevent odours from forming

within the appliance.

If the appliance must be moved, try to keep it in the

vertical position. If absolutely necessary, it can be

positioned on its back.

One of the factors that cause odours to form in the

dishwasher is food that remains trapped in the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

Before cleaning or performing maintenance, always

remove the plug from the socket.

To clean the exterior and rubber parts of the dishwasher,

do not use solvents or abrasive cleaning products.

Only use a cloth with warm soapy water.

To remove spots or stains from the surface of the

interior, use a cloth dampened with water an a little

vinegar, or a cleaning product made specifically for

dishwashers.

Remove the Plug

No Solvents or Abrasive Cleaning

Moving the Appliance

Seals

How to Keep Your Dishwasher in Shape

After every wash, turn off the water supply to the

appliance and leave the door slightly open so that

moisture and odours are not trapped inside.

After Every Wash

When not in Use for a LongTime

1515

Electrical Requirements

Ensure the voltage and frequency of the power being corresponds to

those on the rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug , replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical Connection

Insure proper ground

exists before use

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.

Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving

only this appliance.

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,

along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can

be positioned either to the right or the left sides to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned for levelling, the height of the dishwasher

may be altered via adjustment of the screwing level of the feet.

Positioning the AppliancePositioning the Appliance

About Power ConnectionAbout Power Connection

WARNING! WARNING!

For personal safety:

Do not use an extension cord or an adapter plug

with this appliance.

Do not, under any circumstances, cut or remove the

earthing

Connection from the power cord.

8.Installation instruction8.Installation instruction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover HDP 2D1145X Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info