This button allows you:
- Automatic washing/drying cycle
After the selection of washing programme
according to laundry type, select a degree
of dryness by pressing this button. At the
end of the washing programme, the
selected drying cycle will start automatically.
If a washing programme is not compatible
with automatic drying is selected, this
function will not be activated.
- To only perform a drying cycle
Select the desired drying programme in
conjunction with your fabrics, by pressing
this button it is possible to select a degree
of dryness that is different to the default
one (except for the wool drying
programme).
l To cancel the cycle during the drying
phase, press the button for about 3
seconds.
l "End" will appear in the display at the
end of the programme and the DOOR
LOCKED light will go off, it is now
possible to open the door.
This button allows you to choose between
three different options (available for some
programmes only):
- ACTIVE WASH
l This option (which can be set in several
programs) optimizes the water and
energy consumption of the selected
program, maintaining the washing
performance unchanged.
l ACTIVE WASH is designed for reduced
loads and lightly soiled garments, aiming
to limit the unnecessary waste.
- NIGHT & DAY
l This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
l During the drum water retention phase,
the machine is in pause mode.
l Press START to end the cycle with the
spin (which can be reduced or removed
with the specific button) and drain phase.
l Thanks to electronic control, the water in
the intermediate phases is emptied
silently, making this option very useful for
washing at night.
- DRUM CLEAN
l Developed to clean the washing machine
drum.
l Use only powder detergent.
l Do not start the programme with laundry
in the washing machine.
l It is suggested that this is carried out after
every 50 washing cycles.
l The option can only be selected for the
DRAIN & SPIN programme.
