Turning the machine On
Turn the machine ON by selecting a programme using the
programme selector. This status will be indicated by the END
indicator light flashing, this light will continue to flash until
the machine has started or the machine is returned to the OFF
position.
Start Pause
START
After selecting the programme and the required options press
the Start Pause button once to start the wash cycle. The END
light will stop flashing and START light will illuminate and
there will be a short time delay to the start of the programme
while the machine sets the wash parameters for the selected
programme and options. The door locked indicator light ( )
will also illuminate a few seconds after pressing the Start
Pause button.
PAUSE
The programme may be paused at any time during the wash
cycle by holding down the Start Pause button for about two
seconds. The door locked indicator light will remain
illuminated for approximately 2 minutes. The door can be
16
The Control Panel
“Digital” Display
START
PAUSE
OPTIONS
BUTTONS
SPIN SPEED
SELECTOR
TEMPERATURE
SELECTOR
PROGRAMME
SELECTOR
The programme
selector must be return
to the OFF position to
reset the controls
between each wash
cycle.
To start another wash
cycle the programme
selector must be
returned to OFF once
again before the next
programme can be
selected and started.
