B2 delayed start key
The washing machine can be set to start the programme selected 3, 6 or 9 hours after setting.
To do this, proceed as follows:
- Select the desired programme via the PROGRAMME SELECTOR.
- Press the key once to light up the 3 h timer lamp.
- Press the key twice to light up the 6 h timer lamp.
- Press the key 3 times to light up the 9 h timer lamp.
- Then press (H) to memorise the programme, which will start up after the time selected.
- To cancel the programme timer, press the B2 key again until the End of Cycle lamp comes
on.
Time remaining to end of cycle or programme phase display (V).
Models with this feature display the APPROXIMATE time remaining to the end of the
programme in minutes, or the current wash phase of the programme set. The programme
times may vary depending on the temperature selected, ambient temperature, mains water
pressure, the quantity and type of washing.
“Door lock” lamp (G).
The door lamp flashes when a wash programme starts, and then burns steadily. From that
moment on the door is locked (DOOR LOCK).
The DOOR LOCK lamp remains on during the whole wash cycle, thus preventing the door
from opening.
At the end of the wash cycle, the safety devices are deactivated, the light goes out and the
door can then be opened.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should proceed in the
following manner,
- Put the program selector in the OFF position. At that instant, you have cancelled the
program and can if you wish to do so, select a new one.
- Select the new program.
- Click the key (H) again, until one of the remaining time pilot light lights up.
The washing machine will perform the new selected program.
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the start key (H) until the option key lamps begin to flash and the time remaining
lamp lights up.When the Door Lock lamp goes out (after approx. 2 minutes), open the door
and put the additional washing into the drum.
- Close the drum door and the lid properly.
- Press the start key (H), the time remaining lamp will light up and the machine will continue
with the programme.
When the programme is completed the Stop/End of cycle lamp (S) will come on and the time
remaining and Door Lock lamps (V and G) will go out.
For your own safety, set the programme selector to OFF before opening the washing-
machine lid and the drum doors to remove the washing.
31.01.08/ H- 46004503 EN
