Bedienungsanleitung Hoover hvh 551 b (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

336904

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4 GB

If there are still some stubborn stains:

-Place a few more drops of specialised cleaning fluid on the

surface.

- Scrape with a scraper, holding it at an angle of 30° to the hob,

until the stains disappear.

-Wipe with a soft cloth or dry kitchen paper until the surface is

clean.

- Repeat the operation if necessary.

A FEW HINTS:

Frequent cleaning leaves a protecti

ve layer which is essential to

prevent scratches and wear. Make sure that the surface is clean

before using the hob again. To remove marks left by water, use

a few drops of white vinegar or lemon juice. Then wipe with

absorbent paper and a few drops of specialised cleaning fluid.

The control knobs can be removed for a complete cleaning.

However, you must care not to let any liquid go into the open

zones, and then to push the knobs fully on fitting back.

The glass ceramic surface will withst

and scraping from flat-

bottomed cooking vessels, however, it is always better to lift them

when moving them from one zone to another.

NB:

Do not use a sponge which is too wet.

Never use a knife or a screwdriver.

A scraper with a razor blade will not damage the surface, as

long as it is kept at an angle of 30°.

Never leave a scraper with a razor blade within the reach of

children.

Never use abrasive products or scouring powders.

• The metal surround (on some models): to safely clean the

metal surround wash with soap and water, rinse, then dry wi th

a soft cloth.

30° Maxi

The programmed time can be reset to using the button

or pressing the and buttons at the same time, the cooking

zone is then no longer linked to the timer but stays operational.

So you will have to stop the zone independently.

The timer can be used alone as a reminder, it will ring at the end

of the programmed time.

• FAST HEATER OPERATION

Every cooking zone on the hob is equipped with a fast heater for

raising the cooking zone’s temperature faster:

Starting the fast heater

-Start the required zone, press the button to obtain position

release the button briefly a nd press it again; the display

alternates showing “fast heater” and heat level.

- If necessary reduce to the required heat position.

E.g. 1800 W zone at position 6 = 32% of 1800 W power released

When the “Fast heater” is on, the zone supplies 1800 W power

for 2.5 minutes, and adjusts to 576 W after this time.

* For increased safety, the cooking zones cut off automatically if

they are left on too long. The cut off depends on the heat level

used.

Cooking

position

Power

released

(%)

Time of

fast heater

(minutes)

Maximum

operating

time before

automatic

cut off*

0 : 0 % : 0 : 0 H

1 : 3 % : 1 : 6 H

2 : 6 % : 3 : 6 H

3 : 11 % : 5 : 5 H

4 : 16 % : 6,5 : 5 H

5 : 19 % : 8,5 : 4 H

6 : 32 % : 2,5 : 1,5 H

7 : 45 % : 3,5 : 1,5 H

8 : 65 % : 4,5 : 1,5 H

9 : 100 % : 0 : 1,5 H

• Before ca rrying out any maintenance work on the hob, allow it

to cool down.

• Only products, (creams and scrapers) specifically designed for

glass ceramic surfaces should be used. They are obtainable

from hardware stores.

•Avoid spillages, as anything which falls on to the hob surface

will quickly burn and will make cleaning more diff

icult.

• It is advisable to keep away from the hob all substances which

are liable to melt, such as plastic items, sugar, or sugar-based

products.

MAINTENANCE:

- Place a few drops of the specialised cleaning product on the

hob surface.

-Rub any stubborn stains with a soft cloth or with slightly damp

kitchen paper.

-Wipe with a soft cloth or dry kitchen paper until the surface is

clean.

CLEANING AND MAINTENANCE

The locking function holds the current settings, or prevents anyone

from starting the hob. It is also used for cleaning the control strip

as the controls can be locked without the hob being on.

- Start the required cooking zones.

- Select a heat level for each of them.

- Press the button to set the data; in this way no other

button works, except the On/Off button.

The locking indicator lamp comes on.

To release the locking function, just press the button;

the indicator lamp goes off, all the controls work again.

If when the controls are locked, the timer is on, the time will be

counted automatically and the zone switched off at the end of the

programmed time.

If the locking control is on when the hob is finally shut down, the

locking control stays operati onal and prevents any action when

the hob is restarted, press the button to release the

locking function.

• LOCKING BUTTON OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover hvh 551 b Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info