Problem Cause Solution
The appliance does
not become hot
There is a connection
problem
Check the mains cord, the
plug and the wall socket
The appliance is not
switched on
Press on the on/o switch
The soleplate temperature
is too low
Set a higher temperature of
the soleplate
The appliance does
not produce steam
The appliance is not
switched on
Press on the on/o switch
The boiler has not yet
heated up
Wait a few moments until
the steam ready LED is o
The water tank may be
empty
Rell the water tank
You are not pressing the
steam trigger
Press the steam trigger
The soleplate temperature
is set to the maximum
It works but steam is not
visible as very hot and dry
Steam escapes from
the calc removal cap
when ironing
The calc removal valve is
not tightened enough
Switch o the appliance
and let it cool down.
Remove the calc removal
cap and tighten the valve
correctly
The anti-scale valve is
damaged
Contact your after sales
service
The empty water tank
LED is on
There is no more water in
the tank
Rell the water tank with
water
The soleplates
becomes dirty or
brown
There should be chemical
or additives in the water
used for ironing
Never use any chemical or
additives in the water.
Contact your after sales
service if the linen is still
dirty
The linen is still dirty Clean the soleplate with a
non-metallic sponge
Water stripes appear
on the textile
Your ironing board cover is
saturated in water
Change the cover or use a
mesh ironing board
Some scale deposit
appears on the
soleplate
Your boiler has not been
rinsed for a while
Follow the indications in the
appropriate chapter
Important Information
Hoover spares and
Consumables
Always replace parts with genuine Hoover spares. These are available from your local
Hoover dealer or direct from Hoover. When ordering spare parts, always check your
model number.
Hoover Service
Should you require service at any time, please contact your local Hoover Service
Oce. Please see all the contact details below.
Safety
Hoo ver believes that independent approval is the best way of demonstrating safety
in design and manufacture. “Istituto del Marchio di Qualità” (IMQ) ), the independent
italian national authority for the safety of domestic electrical appliances, ensures that
Euro pean safety standards are met and maintained throughout the production life
of an appli ance. All appliances that pass the requirements are permitted to carry the
IMQ mark of safety.
Quality
ISO 9001
Hoover’s factories have been independently assessed for quality. Our products are
made using a quality system which meets the requirements of ISO 9001
The Environment
This appliance is marked according to the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The symbol on the product indicates that this product may not be treated as
household waste. Instead it shall be handed over to the appliance collection point for
recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with the local environmental regulations
for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local city oce, your household waste disposal service
or the shop where you purchased the product.
Your Guarantee
The guarantee conditions for this appliance are as dened by our representative in
the country in which it is sold. Details regarding these conditions can be obtained
from the dealer from whom the appliance was purchased. The bill of sale or receipt
must be produced when making any claim under the terms of this guarantee.
Subject to change without notice.
GB
