Bedienungsanleitung Hoover Spirit (Seite 5 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

511136

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

(*Certain Models Only)

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before

calling your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another electrical

appliance.

• Is the dust container over-filled? Please refer to ‘Cleaner Maintenance’.

• Is the filter blocked? Please refer to ‘Cleaner Maintenance’.

• Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.

• Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically

reset.

IMPORTANT INFORMATION

Hoover Spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover

dealer or direct from Hoover. When ordering parts always quote your model number.

Consumables

• Filter kit (Pre motor and Exhaust) U62 35601182

Spares

• Flexible Hose D127 35601181

• Carpet and Floor Nozzle G82 35600417

• Parquet Nozzle G87PC 35600655

• Mini turbo Nozzle J20 09200356

Quality and the Environment

Safety

Although safety certification of electrical appliances is not required by law in the UK, Hoover

believe that independent approval is the best way of demonstrating safety in design and

manufacture. The British Electrotechnical Approvals Board (BEAB), the independent UK

national authority for the safety of domestic electrical appliances, ensures that European

safety standards are met and maintained throughout the production life of an appliance.

All appliances that pass the requirements are permitted to carry the BEAB mark of safety.

Quality

BSI ISO 9001

Hoover’s factories have been independently assessed for quality. Our products are made

using a quality system which meets the requirements of ISO 9001.

To access the exhaust filter:

1. Press the exhaust filter grid latch to access to the exhaust filter from rear of the cleaner.

[20]

2. Remove the exhaust filter from the grid. [21]

3. Gently tap and wash the exhaust filter, do not use hot water or detergents. Remove

excess water from the exhaust filter and leave to dry fully before re-using. [22]

4. Refit the exhaust filter to grid once fully dry and refit the exhaust grid.

IMPORTANT: Do not use the product without the exhaust filter fitted.

Removing a blockage

1. Check if the dust container is full. If so refer to ‘Emptying the dust container’.

2. If the dust container is empty but suction is still low:

A. Do the filters need cleaning? If so refer to ‘Cleaning the washable filters’.

B. Check if there is any other blockage in the system - Use a rod or pole to remove any

blockage from the extension tube or flexible hose.

C. Check if pre-motor filter is fitted and filter door is closed.

Warning (Certain models only*) -. If the cleaner is used for a significant period of time

when dust container is full, filters are dirty and with a blockage in the system, a thermal

cut out will switch the cleaner off to prevent overheating. If this should happen, switch the

cleaner off, unplug and correct the fault. It will take about 30 minutes for the cut out to

automatically reset.

Spirit_Manual ML IM.indd 3 4/5/2011 11:07:14 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover Spirit Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info