Bedienungsanleitung Hoover SteamVac CleanSurge (Seite 10 von 40) (Englisch, Französisch, Spanisch)

594437

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

with the type of spill, time elapsed

before removal, carpet material, and

carpet type.

f. T

o prevent staining,

use plastic or

aluminum foil to protect wood or metal

sur

faces fr

om possible water spray

g. To avoid wetting and possible

damage to wood floors underneath

area rugs/carpet,

either move area

rugs/ carpet to a non-wood bare floor

surface or

place waterproof material

(e.g. plastic) under

neath them befor

cleaning.

See pages 11and 12 for instructions on

various cleaning tasks.

*Available at additional cost if not

included with your model.

2-16

2-19

-17

2-18

Step on handle release pedal and

lower handle until it rests on the

floor.

If cleaning stairs or upholstery,

remove hose by reversing procedure

as shown on pages 12 and 13.

Rotate recovery tank latches (E) out-

ward (one on each side of tank).

Lift tank off of carpet cleaner and

carry it to a sink or drain.

Unlatch back part of tank lid and

remove lid.

Empty tank. Pour dirty water out

from the rear of the tank (F).

The lid replaces in a hinge-like

manner. Position the front of lid

under tabs (G) on front of tank.

Rotate lid down onto tank.

Make

sure that the lid is secure on all

sides before placing tank on

cleaner.

For full suction, it is important

that the recovery tank lid is prop-

erly secured before cleaning.

Replace tank and press down to

ensure that it is properly seated in

place.

Rotate latches (E) (one on each

side of tank) inward to lock tank

in place.

To continue cleaning stairs or uphol-

stery, replace hose as shown on

pages 12 and 13.

Raise handle to upright position and

replace upper clean solution tank.

3. How to clean

Before you begin

cleaning

a. Vacuum thoroughly - For carpet,

use a vacuum cleaner with an agita-

tor for best results. Vacuum uphol-

stery with a vacuum cleaner with

cleaning tool attachments. Use a

crevice tool to reach into tufts and

folds.

Do not use the SteamVac™

carpet cleaner as a dry vacuum

cleaner.

b. For upholstery, check cleaning

code -

Use your HOOVER

SteamVac™ carpet cleaner only if

the upholstery fabric is marked with

a “W” (for “wet” clean) or “S/W” (for

“solvent/dry” or “wet” clean). Do not

clean fabric marked “S” (“sol-

vent/dry” clean only). If your

upholster

y does not have a code,

seek professional assistance.

c. Test for colorfastness - Mix deter-

gent and water according to the instruc-

tions under “Fill clean solution tank” on

pages 8 and 9. Wet a white absorbent

cloth with the solution. In a small, hidden

area, gently rub the surface with the

dampened cloth. Wait ten minutes and

check for color removal or bleed with

white paper towel or cloth. If surface has

more than one color, check all colors.

d. When cleaning entire floor,

move furniture out of area to be

cleaned

(may not be necessary if

only high traffic areas are to be

cleaned). For furniture too heavy to

move, place aluminum foil or wax

paper under legs. This will prevent

wood finishes from staining carpet.

Pin up furniture skirts and draperies.

e. Pretreat spots and heavy traffic

areas with HOOVER® Spot and

Stain Spray Cleaner*-

Test Spot and

Stain Spray Cleaner for colorfastness

by first spraying it on a hidden area;

wait ten minutes and blot with white

paper towels or cloth.

If no color change is visible, spray Spot

and Stain Spray Cleaner onto spots

and traffic areas. Wait at least ten min-

utes. Use your SteamVac™ carpet

cleaner to pick up Spot and Stain

Spray Cleaner and spot. Repeat until

spot is r

emoved; carefully scrub with a

household scrub brush if necessary.

Do not saturate carpet or upholstery

with Spot and Stain Spray Cleaner

If you do not have access to the

Spot and Stain Spray Cleaner,

double the amount of HOOVER

Carpet/ Upholstery Detergent (use

2 capfuls or 10 oz. per 1 gallon) in

the clean solution tank.

No cleaning solution removes all stains

om all carpets. Stain r

emoval varies

After cleaning

a. Allow carpet or upholstery to dry.

To help prevent matting and resoil-

ing the carpet, keep children and

pets away from surface until it is

completely dry. If it is necessary

to walk on damp carpet, place tow-

els or white cloths on the traffic

areas.

If fur

nitur

e must be replaced before

the carpet is dr

y, use plastic or alu-

minum foil pads under legs of furni-

ture so metal slides or wood finishes

will not stain the carpet.

b. If desired, the carpet may be

rinsed. Rinsing is not necessary

for cleaning, but it may improve the

surface’s appearance after it is dry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover SteamVac CleanSurge Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info