Bedienungsanleitung Hoover SteamVac TurboPower (Seite 11 von 63) (Englisch, Französisch, Spanisch)

594438

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Continue to squeeze trigger and slowly pull carpet

cleaner back toward you (second wet stroke).

Release trigger and slowly push carpet cleaner

forward over area just sprayed with solution (dry

stroke). Then slowly pull carpet cleaner back toward

you without squeezing trigger (dry stroke).

Overlap strokes by 1 inch to help prevent streaking.

Keep nozzle flat on floor for both forward and reverse

strokes.

3.3 To get the most effective cleaning, clean room in

sections as shown. Do not use the same cleaning

technique as with a vacuum.

For heavily soiled areas, repeat back and forth

cleaning motion.

For particularly soiled carpet or spots, use the Clean

Surge

feature (available on select models only).

Avoid saturating carpet as noted.

It is best to alternate wet and dry strokes as described

above.

For best cleaning results and to aid in faster drying of

carpet, end with more dry strokes. (Continue using

dry strokes until little water is visible passing through

the Dirty Water Tank lid.)

Start

Exit

3.3

IMPORTANT

To avoid saturating carpet, do not use more

than 4 wet strokes over one area. Always end

with dry strokes.

CLEAN SURGE

BUTTON

(Available on select models only)

The Clean Surge

button can be used to dispense

extra solution when cleaning particularly soiled areas

of carpet or spots.

To use, press Clean Surge

button while squeezing

solution trigger. For normal solution spray, release

button and continue to squeeze solution trigger.

Your HOOVER

SteamVac

carpet cleaner may also

be used to pick up small liquid spills (1 gallon or less,

never to exceed 1/4 inch in depth) on carpet,

upholstery, or bare floors.

For best results, pick up spills immediately by placing

the stair/upholstery nozzle (Available on select

models only) just above the spill and suction up any

residue on top of the carpet. If the spill remains, place

either the stair/ upholstery nozzle or floor nozzle with

brushes turned OFF in front of the spill, pull the

nozzle very slowly over the spill initially with suction

only. Repeat with spray and suction.

When picking up spills on bare floors, use only the

floor nozzle with the bare floor attachment (Available

on select models. Bare floor attachment sold

separately) in place and speed selector in the OFF

position (this will help prevent spreading the spill).

PICKING UP SPILLS

If a spot is left, the stair/upholstery nozzle is generally

more effective for removing it. Although no cleaning

solution can completely remove all spots, they can

be treated by following the instructions provided by

the manufacturer of the carpet, upholstery, or bare

floor surface being cleaned.

Do not use the SteamVac

carpet cleaner to pick up

flammable or combustible liquids or chemicals.

Actual model may vary from images shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover SteamVac TurboPower Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info