Bedienungsanleitung Hoover SteamVac (Seite 10 von 63) (Englisch, Französisch, Spanisch)

594435

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

BEFORE YOU BEGIN CLEANING

A. Vacuum thoroughly - For carpet, use a Hoover

vacuum cleaner with an agitator for best results.

Vacuum upholstery with a vacuum cleaner with

cleaning tool attachments. Use a crevice tool to

reach into tufts and folds. Do not use the SteamVac

carpet cleaner as a dry vacuum cleaner.

B. For upholstery, check cleaning code - Use your

HOOVER

SteamVac

carpet cleaner only if the

upholstery fabric is marked with a “W” (for “wet”

clean) or “S/W” (for “solvent/dry” or “wet” clean). Do

not clean fabric marked “S” (“solvent/dry” clean

only). If your upholstery does not have a code, seek

professional assistance.

C. Test for colorfastness - Mix detergent and

water according to the instructions under “Fill Clean

Water Solution Tank” on pages 8. Wet a white

absorbent cloth with the solution. In a small, hidden

area, gently rub the surface with the dampened

cloth. Wait ten minutes and check for color removal

or bleed with white paper towel or cloth. If surface

has more than one color, check all colors.

D. When cleaning entire floor, move furniture out

of area to be cleaned (may not be necessary if only

high traffic areas are to be cleaned). For furniture

too heavy to move, place aluminum foil or wax

paper under legs. This will prevent wood finishes

from staining carpet. Pin up furniture skirts and

draperies.

E. Pretreat spots and heavy traffic areas with

HOOVER

Spot and Stain Spray Cleaner- Test

Spot and Stain Spray Cleaner for colorfastness by

first spraying it on a hidden area; wait ten minutes

and blot with white paper towels or cloth.

If no color change is visible, spray Spot and Stain

Spray Cleaner onto spots and traffic areas. Wait at

least ten minutes. Use your SteamVac

carpet

cleaner to pick up Spot and Stain Spray Cleaner

and spot. Repeat until spot is removed; carefully

scrub with a household scrub brush if necessary.

Do not saturate carpet or upholstery with Spot and

Stain Spray Cleaner.

No cleaning solution removes all stains from all

carpets. Stain removal varies with the type of spill,

time elapsed before removal, carpet material, and

carpet type.

F. To prevent staining, use plastic or aluminum foil

to protect wood or metal surfaces from possible

water spray.

G. To avoid wetting and possible damage to

wood floors underneath area rugs/carpet, either

move area rugs/carpet to a non-wood hard floor

surface or place waterproof material (e.g. plastic)

underneath them before cleaning. If rinsing is

desired, be careful not to over-wet the carpet or

upholstery.

Allow time for carpet or upholstery to dry completely

between cleaning and rinsing. To rinse, follow the

same procedure for cleaning only using hot tap

water with no detergent in the upper Clean Water

Solution Tank.

H. Empty tanks, rinse with clear water and let air

dry. Rinse the Clean Water Solution Tank cap and

Dirty Water Tank lid and let air dry.

3. HOW TO CLEAN

Actual model may vary from images shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover SteamVac Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info