Bedienungsanleitung Horizon Fitness Andes 6 (Seite 12 von 15) (Englisch)

520065

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

22 23

BASIC TROUBLESHOOTING

PROBLEM: The console does not light up.

SOLUTION: Verify the following:

• The outlet the machine is plugged into is functional. Double

check that the breaker has not tripped.

• The correct power cord is being used. Only use the power

cord included or provided by your Locad Dealer.

• The power cord is not pinched or damaged and is properly

plugged into the outlet AND the machine.

• The power switch is turned to the ON position (may not apply

to all models).

• Turn off the machine and unplug power cord. Remove the

console and check that all connections to the console are

secure and not damaged or pinched.

• If your console uses batteries, they may need to be replaced.

PROBLEM: The console lights up but the Time/RPM’s do not

count.

SOLUTION: Verify the following:

• Turn off machine and unplug power cord. Remove the console

and check that all connections to the console are secure and

not damaged or pinched.

• If doing the above does not fix the problem, the speed sensor

and/or magnet may have become dislodged or damaged.

PROBLEM: The resistance levels seem to be

incorrect, seeming too hard or too easy.

SOLUTION: Verify the following:

• The correct power cord is being used. Only use

the power cord provided or authorized by your

Locad Dealer.

• Reset the console and allow the resistance to

reset to the default position. Restart and retry

the resistance levels.

PROBLEM: The roller wheels appear to be leaving

particles on the guide rails.

SOLUTION: This is considered normal wear of the

elliptical wheels. To remove, simply wipe off the roller

wheels and guide rails with a damp cloth.

PROBLEM: The elliptical makes a squeaking or

chirping noise.

SOLUTION: Verify the following:

• The elliptical is on a level surface.

• Loosen all bolts attached during the assembly

process, grease the threads, and tighten again.

• Apply a lithium-based grease to the top surface

of the guiderails.

COMMON PRODUCT QUESTIONS

ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?

Our ellipticals are some of the quietest available because they use belt drives and friction free magnetic resistance. We use the

highest grade bearings and belts to minimize noise. However, because the resistance system itself is so quiet, you will occasionally

hear other slight mechanical noises. Unlike older, louder technologies, there are no fans, friction belts, or alternator noises to mask

these sounds on our ellipticals. These mechanical noises, which may or may not be intermittent, are normal and are caused by the

transfer of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts will generate some

noise which will transmit through the casing and frame. It is also normal for these sounds to change slightly during a workout and over

time because of thermal expansion of the parts.

WHY IS THE ELLIPTICAL I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?

All fitness products seem quieter in a large store showroom because there is generally more background noise than in your home.

Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay floor. Sometimes a heavy rubber mat will

help reduce reverberation through the floor. If a fitness product is placed close to a wall, there will be more reflected noise.

HOW LONG WILL THE DRIVE BELT LAST?

The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are now commonly used in far

more demanding applications such as motorcycle drives.

CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?

Your elliptical has a pair of transport wheels built into the front stabilizer tube. Please follow the MOVING THE ELLIPTICAL section

to transport your elliptical. It is important that you place your elliptical in a comfortable and inviting room. Your elliptical is designed to

use minimal floor space. Many people will place their ellipticals facing the TV or a picture window. If at all possible, avoid putting your

elliptical in a unfinished basement. To make exercise a desirable daily activity for you, the elliptical should be in a comfortable setting.

CAN I PEDAL BACKWARDS ON MY ELLIPTICAL?

Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range of muscles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Horizon Fitness Andes 6 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Fitness Andes 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info