Bedienungsanleitung Horizon Fitness SL3.0E (Seite 1 von 1) (Englisch)

642680

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

UNPACKING

Unpack your elliptical trainer where you will be using

it. Place your trainer on a level flat surface. It is

recommended that you place a protective covering

on your floor. You will only need to attach the

following items. Verify that the following parts and

tools are included: FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD RESULT IN INJURY!

• 1 Console

• 1 Foot Tube

• 1 Front Foot Tube

• 1 Rear Foot Tube

• 2 Upper Handlebars

• 2 Lower Handlebars

• 2 Pedal Arms

• 1 Console Mast

• 1 Console Mast Boot

• 1 Water Bottle and Holder

Parts

NOTE: It is recommended that you apply grease

to the threads of each bolt as you assemble your

elliptieal trainer, to prevent loosening and that ALL

nuts and bolts are in place and partially threaded in

before completely tightening any ONE bolt.

LIMITED HOME USE WARRANTY

FRAME • LIFETIME

Horizon Fitness warrants the frame against defects in

workmanship and materials for the lifetime of the original

owner.

ELECTRONICS & PARTS

Horizon Fitness warrants the electronic components and all

original parts for aperiod from the date of original purchase, so

long as the device remains in the possession of the original

owner.

LABOR

Horizon Fitness shall cover the labor cost for the repair of the

device for a period from the date of the original purchase, so

long as the device remains in the possession of the original

owner.

EXCLUSIONS AND LIMITATIONS

This warranty applies only to the original owner and is not

transferable. The warranty is expressly limited to the repair or

replacement of a defective frame, electronic componet, or

defective part and is the sole remedy of the warranty.

The warranty does not cover normal wear and tear, improper

assembly or maintenance, or installation of parts or

accessories not originally intended or compatible with the

elliptical trainer as sold. The warranty does not apply to

damage or failure due to accident, abuse, corrosion,

discoloration of paint or plastic, or neglect. Horizon Fitness

shall not be responsible for incidental or consequential

damages. All returns must be pre-authorized by Horizon

Fitness. Horizon Fitness' obligation under this warranty is

limited to replacing or repairing, at Horizon Fitness' option, the

product at one of its authorized service centers. An Horizon

Fitness authorized service center must receive all products for

which a warranty claim is made. These products must be

received with all freight and other transportation charges

prepaid, accompanied by sufficient proof of purchase. Parts

and electronic components reconditioned to As New Condition

by Horizon Fitness or its vendors may sometimes be supplied

as warranty replacement parts and constitute fulfillment of

warranty terms. This warranty gives you specific legal rights,

and your rights may vary from state to state.

Please consult your local dealer for more

warrany details.

Horizon Fitness

COMMON PRODUCT QUESTIONS

ARE THE SOUNDS MY ELLIPTICAL TRAINER MAKES NORMAL?

Our elliptical trainer are some of the quietest available because they

use belt drives and friction free magnetic resistance. We use the

highest grade bearings and belts to minimize noise. However,

because the resistance system itself is so quiet, you will occasionally

hear other slight mechanical noise. Unlike older, louder technologies,

there are no fans, friction belts, or alternator noises to mask these

sounds on our elliptical trainer. These mechanical noises, which may

or may not be intermittent, are normal and are caused by the transfer

of significant amounts of energy to a rapidly spinning flywheel. All

bearings, belts and other rotating parts will generate some noise

which will transmit through the casing and frame. It is also normal for

these sounds to change slightly during a workout and over time

because of thermal expansion of the parts.

WHY IS THE ELLIPTICAL TRAINER I HAD DELIVERED LOUDER

THAN THE ONE AT THE STORE?

All fitness products seem quieter in a large store showroom because

there is generally more background noise than in your home. Also,

there will be less reverberation on a carpeted concrete floor than on

a wood overlay floor. Sometimes a heavy rubber mat will help reduce

reverberation through the floor. If a fitness product is placed close to

a wall, there will be more reflected noise.

HOW LONG WILL THE DRIVE BELT LAST?

The computer modeling we have done indicated virtually thousands

of maintenance free hours. Belts are now commonly used in far more

demanding applications such as motorcycle drives.

CAN I MOVE THE ELLIPTICAL TRAINER EAISER ONCE IT IS

ASSEMBLED?

Your Horizon Fitness elliptical trainer has a pair of transport wheels

built into the front foot. It is easy to move your elliptical trainer by

rolling it on the front transport wheels.

It is important that you place your Horizon Fitness elliptical trainer in

a comfortable and inviting room. Your elliptical trainer is designed to

use minimal floor space. Many people will place their elliptical trainer

facing the TV or a picture window. If at all possible, avoid putting your

elliptical trainer in a unfinished basement. To make exercise a

desirable daily activity for you, the elliptical trainer should be in a

attractive setting.

Assembly Guide

ASSEMBLY GUIDE

Important Safety Instruction

Save These Instructions

SL3.0E SL4.0E HRC

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our elliptical trainer so lubrication

is not needed. The most important maintenance step is to simply

wipe your perspiration off the trainer after each use.

HOW DO I CLEAN MY HORIZON FITNESS ELLIPTICAL TRAINER?

Clean with soap and water cleaners only. Never use solvents on

plastic parts. Cleanliness of your Horizon Fitness elliptical trainer and

its operating environment will keep maintenance problems and

service calls to a minimum. For this reason. Horizon Fitness

recommends that the following preventive maintenance schedule be

followed.

AFTER EACH USE (DAILY)

Turn off the elliptical trainer with the on/off switch, and unplug the

power cord from the wall outlet.

STEP 2

STEP 4

STEP 3

STEP 9

STEP 1

SL3.0E SL4.0E HRC

A) M10x55mm bolt

quantity: 4

B) 18mm spring washer

quantity: 4

C) 20mm flat washer

quantity: 4

D) M5x12mm bolt

quantity: 4

F) 17mm arc washer

E) M8x15mm bolt

quantity: 4

K) M5 L) M4

quantity: 12

I) M4x10mm bolt

J) 10mm bolt

quantity: 4

quantity: 2

H) 4x10mm bolt

G) M3x22L bolt

quantity: 8

STEP 5

STEP 6

STEP 7

STEP 8

M) 15#17#

HARDWARE

I I

CONSOLE

UPPER HANDLE BAR

CONSOLE MAST

WATER BOTTLE

& HOLDER

CONSOLE MAST

BOOT

PEDAL ARM

LOWER

HANDLE BAR

FRONT FOOT

TUBE

REAR FOOT

TUBE

Horizon Fitness SL3.0E Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Fitness SL3.0E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info