606951
13
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
13
Spektrum DX4C • tranSmitter inStruCtion manual
EN
SWITCH
The Switch Screen lets you assign 5 available switches to these
special functions:
ST trim Assigns a switch to adjust center or neutral so steering
tracks straight.
TH trim Assigns the throttle idle adjustment to switch. Adjust
throttle neutral (idle) position for drag braking or rolling
idle for some models. Decreasing idle can enable a
drag brake. Increasing idle can keep a model rolling
until the brake is used.
Brake Assigns brake trim to switch. Full brake is the default.
Braking power can be decreased using this trim on
some models.
Aux 1 Lin Assigns channel 3 (Auxiliary) to switch as linear output
(see servo illustration). This allows for proportional
adjustment of servo position. This is particularly useful
for fuel mixture control on gas engines.
Aux 1 2P Assigns channel 3 (Auxiliary) to switch as 2-posi-
tion output (see servo illustration). This is useful for
forward and reverse transmissions and some 2-speed
transmissions.
Aux 1 3P Assigns channel 3 (Auxiliary 1) to switch as 3-posi-
tion output (see servo illustration). This is useful for
forward, neutral and reverse transmissions and some
dig transmissions.
Aux 2 Lin Assigns channel 4 (Auxiliary 1) to switch as linear out-
put (see servo illustration). This allows for proportional
adjustment of servo position. This is particularly useful
for fuel mixture control on gas engines.
Aux 2 2P Assigns channel 4 (Auxiliary 2) to switch as 2-position
output (see servo illustration). This is useful for forward
and reverse transmissions and some 2-speed trans-
missions.
Aux 2 3P Assigns channel 4 (Auxiliary 2) to switch as 3-posi-
tion output (see servo illustration). This is useful for
forward, neutral and reverse transmissions and some
dig transmissions.
Tip: Reverse and Travel Screens adjust the endpoints and
direction of the Auxiliary channel.
ROSS Remote start assigned to a switch.
ST D/R Assigns Steering rate to a switch so a driver can make
on-the-fly steering travel adjustments. Steering rate
limits the amount of travel of the steering servo.
ST GAIN Assigns the ST Gain to a switch, enabling you to adjust
the sensitivity without using the AVC menu.
TH GAIN Assigns TH Gain to a switch, enabling you to adjust the
sensitivity without using the AVC menu.
ST/TH GAIN Assigns the ST GAIN and TH GAIN to the same switch,
enabling you to adjust both gain values
simultaneously.
Priority Assigns the AVC Priority to a switch, enabling you to
adjust the priority without using the AVC menu.
Inhibit No function assigned to switch.
* LOSI ROSS (Remote Onboard Starting System)
A Box shows around selected text
B Switch letter (see transmitter illustration)
C Function assigned to the switch
Assignment of switches in other screens changes what is shown
in this screen.
The factory default switch assignments are shown here. Reset of
the transmitter returns switch assignments to these functions.
1 2
3
100
2
1
1
3P (3 position)
Lin (Linear)
2P (2 position)
C
A
B
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Horizon Hobby DX4C Transmitter wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Horizon Hobby DX4C Transmitter

Horizon Hobby DX4C Transmitter Bedienungsanleitung - Deutsch - 21 seiten

Horizon Hobby DX4C Transmitter Bedienungsanleitung - Französisch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info