Bedienungsanleitung Horizon Hobby DX7 - 7 Channel DSMX Transmitter (Seite 12 von 50) (Englisch)

606949

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

12 SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL

You establish failsafe positions when you bind your transmitter and

receiver. If the radio signal connection is lost between the transmitter

and receiver, the receiver immediately moves the aircraft control

surfaces to the failsafe positions. If you assign the receiver THRO

channel to a transmitter channel other than throttle, we recommend

using Preset failsafe with the throttle in the low position.

NOTICE: Failsafe features vary according to receiver. Always consult

the receiver instruction manual for failsafe features.

Before ﬂ ight, ALWAYS conﬁ rm the failsafe functions as you would

expect.

SmartSafe™ Failsafe

SmartSafe failsafe is a technology that only acts on the throttle channel

and offers the following beneﬁ ts:

• Prevents electric motors from operating when the receiver power

is on and the transmitter power is off.

• Prevents the speed controller from arming until the throttle is

moved to the low throttle position.

• Powers off an electric motor and reduces gas/glow engines to idle

if signal is lost.

To Program SmartSafe:

Move the throttle to the low or off position before putting the

transmitter into bind mode.

To Test the SmartSafe failsafe

1. Power the transmitter and receiver on.

2. Power off the transmitter. The throttle should immediately move

to the failsafe position.

CAUTION: Make sure the aircraft is fully restrained on the

ground. If the failsafe is not set correctly, your aircraft might

advance to mid or full throttle.

Hold Last Command

The Hold Last Command failsafe maintains the last command on all

channels except throttle. If the radio signal is lost, the aircraft maintains

the commanded control inputs until the receiver regains signal.

To program Hold Last Command, follow the provided binding

instructions in this instruction manual.

To Test Hold Last Command:

1. Power on the transmitter and receiver.

2. Move one of the control sticks to the desired Hold Last

Command position and hold the input.

3. While holding the control input (for example, a small amount of

rudder) power off the transmitter. The rudder should maintain

the input command.

CAUTION: Make sure the aircraft is fully restrained on the

ground. If the failsafe is not set correctly, the aircraft throttle

might advance to mid or full throttle.

Preset Failsafe

The Preset failsafe moves all channels to their programmed failsafe

positions.

We recommend using Preset failsafe to deploy spoilers on sailplanes

to prevent a ﬂ yaway if the radio signal is lost.

To program Preset failsafe:

1. Insert the bind plug in the bind port on the receiver and power

on the receiver.

2. Remove the bind plug when the orange LED on the main

receiver and all attached remote receivers ﬂ ash rapidly. The

orange receiver LEDs will continue ﬂ ashing.

3. Move the transmitter control sticks and switches to the desired

Preset failsafe position. Power the transmitter on.

4. Failsafe programming is complete when the orange LEDs on

the transmitter and all receivers turn solid.

CAUTION: Make sure the aircraft is fully restrained on the

ground. If the failsafe is not set correctly, the aircraft throttle

might advance to mid or full throttle.

PROGRAMMING FAILSAFE POSITIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Horizon Hobby DX7 - 7 Channel DSMX Transmitter Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Hobby DX7 - 7 Channel DSMX Transmitter

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info