Bedienungsanleitung Horizon Hobby DX7 - 7 Channel DSMX Transmitter (Seite 19 von 50) (Englisch)

606949

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

19SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL

TELEMETRY

Installing the optional telemetry module and sensors enables the

display of aircraft performance data on the transmitter screen.

You can also enable Data Logging to save a telemetry ﬁ le on

the SD Card and view the data in the Spektrum STi

mobile

application.

Display

Telemetry display options include:

Tele: When you press the scroll wheel, the Telemetry screens

appear and the Main Screen is disabled.

Main: Telemetry alerts appear on the Main screen, but all

Telemetry screens are disabled.

Roller (Default): Allows you to toggle between the Telemetry

screens and the main screen by pressing the

scroll wheel.

Auto: The Telemetry screen automatically appears as soon as

the transmitter receives data from the telemetry module.

Units

Scroll to Units and press the scroll wheel to change between US

and Metric.

IMPORTANT: The Auto-Conﬁ g option is not available from the

System Setup>Telemetry menu. RF signal must be transmitting

when you use the Auto-Conﬁ g option. When the System Setup

menu is active, RF signal is off.

The DX7 transmitter features telemetry Auto-Conﬁ guration,

allowing the transmitter to detect new telemetry sensors.

To use Telemetry Auto-Conﬁ g:

1. Make sure all telemetry components are bound to the

transmitter and receiver.

2. Power on the transmitter, then power on the receiver.

3. Select Telemetry from the Function List, then select Auto

Conﬁ g. “Conﬁ guring” ﬂ ashes for 5 seconds and any new

sensors appear in the list.

4. Adjust the sensor alert values as necessary.

Status Reports:

Status Reports determines how often the transmitter refreshes

the data on the screen. Each telemetry sensor can be adjusted

independently.

For example, the RPM status report can refresh every 10 seconds

while the altimeter sensor refreshes every 15 seconds.

Warning Reports:

Warning Reports determines how often a telemetry alert occurs,

if an alert is active.

SYSTEM SETUP

When using an AS3X receiver (AR636, AR6335, AR9350, etc.),

AS3X Live Gain View allows:

• Real time display of gain values for Roll, Pitch and Yaw

• Gains to be adjusted from the roller

• Selection of the channel that is used to adjust gains (must match

application)

• Selection of the switch that is used to change ﬂ ight modes

To activate AS3X Gain Live View:

1. Enter the Telemetry screen from either the Function List or the

System Setup list.

2. Scroll to the desired “Empty” channel to use for gain

adjustment.

3. Press and scroll to select AS3X. The AS3X Gain menu is now

available in the Function List.



Telemetry Settings



Telemetry Auto-Conﬁ guration



AS3X Gain Live View (ACRO and SAIL Types Only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Horizon Hobby DX7 - 7 Channel DSMX Transmitter Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Hobby DX7 - 7 Channel DSMX Transmitter

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info