Bedienungsanleitung Hormann Schuifhekaandrijving (Seite 33 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

538730

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Error acknowledgement10.2

If an error occurs, this can be acknowledged, provided the

error is no longer present.

On pressing the internal or external impulse generator, f

the error is deleted and the gate travels in the

corresponding direction.

Dismantling and Disposal11

Have the sliding gate operator dismantled and disposed of by

a specialist.

Optional Accessories12

Optional accessories are not included in the scope of delivery.

Loading of the operator by all electrical accessories: max.

100 mA.

The following accessories are available:

External radio receivers•

External impulse button, e.g. key switch•

External code and transponder switches•

One-way photocell•

Warning lamp/warning light•

Photocell expander•

Warranty Conditions13

Warranty

We shall be exempt from our warranty obligations and

product liability in the event that the customer carries out his

own structural alterations or undertakes improper installation

work or arranges for same to be carried out by others without

our prior approval and contrary to the installation guidelines

we have provided. Moreover, we shall accept no responsibility

for the inadvertent or negligent use of the operator or

improper maintenance of the gate and the accessories nor for

a non-authorized method of installing the gate. Batteries are

also not covered by the warranty.

Warranty period

In addition to the statutory warranty provided by the dealer in

the sales contract, we grant the following warranty for parts

from the date of purchase:

5 years for the operator mechanics, motor, and motor •

control

2 years on radio equipment, impulse generator, •

accessories and special systems

There is no warranty on consumables (e.g. fuses, batteries,

lamps). Claims made under the warranty do not extend the

warranty period. For replacement parts and repairs the

warranty period is six months or at least the remainder of the

warranty period.

Prerequisites

A claim under this warranty is only valid for the country in

which the equipment was bought. The product must have

been purchased through our authorised distribution channels.

A claim under this warranty exists only for damage to the

object of the contract itself. Reimbursement of expenditure

for dismantling and installation, testing of corresponding

parts, as well as demands for lost proﬁts and compensation

for damages, are excluded from the warranty. The receipt of

purchase substantiates your right to claim under the warranty.

Performance

For the duration of the warranty we shall eliminate any

product defects that are proven to be attributable to a

material or manufacturing fault. We pledge to replace free of

charge and at our discretion the defective goods with non-

defective goods, to carry out repairs, or to grant a price

reduction.

Damages caused by the following are excluded:

improper ﬁtting and connection,•

improper initial start-up and operation,•

external factors such as ﬁre, water, abnormal •

environmental conditions,

mechanical damage caused by accidents, falls, impacts,•

negligent or intentional destruction,•

normal wear or deﬁcient maintenance,•

repairs conducted by unqualiﬁed persons,•

use of non-original parts,•

removal or defacing of the type plate•

Replaced parts become our property.

Technical data14

Max. gate width: 6,000 mm/8,000 mm

depending on operator type

Max. gate height: 2,000 mm

Max. gate weight: 300 kg/500 kg depending on

operator type

Rated load: See type plate

Max. pull and push force: See type plate

Operator housing: Die-cast zinc and weather-

resistant, glass-ﬁbre reinforced

plastic

Mains voltage: Rated voltage 230 V/50 Hz

Max. power input 0.15 kW

Control: Microprocessor control

system, programmable via 12

DIL switches, control voltage

24 V DC

Operating mode: S2, short-time duty 4 minutes

Temperature range: -20°C to +60°C

Travel/force limit: Electronic

Automatic safety cut-out: Force limit for both operational

directions, self-programming

and testing

Hold-open phase: 60 seconds (photocell •

required)

5 seconds (shorter hold-•

open phase with through-

trafﬁc photocell)

Motor: Spindle unit with 24 V DC

motor and worm gears,

protection category IP 44

Radio remote control: 2-channel receiver,

hand transmitter

TR10A059-C RE / 10.2008 33

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hormann Schuifhekaandrijving Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info