53
05.2004 TR10A011 RE
ENGLISH
- repair by non-qualified persons
- use of non-original parts
- removal or making unrecognisable the serial number
Replaced parts become our property.
8 Technical Data
Power supply: 230/240 V, 50/60 Hz
standby approx. 4,5 W
Protection category: For dry rooms only
Automatic cut-out: Automatically programmed
separately for both operational
directions.
End-of-travel Self-learning, non-wearing, since
cut-out/Force limit: no mechanical switches are
used. Additionally integrated
excess travel stop of approx.
45 s. Automatic cut-out read-
justs itself during each travel
cycle.
Rated load: (see type plate)
Push and pull force: (see type plate)
Short-time peak load: (see type plate)
Motor: DC motor with Hall sensor
Transformer: With thermal overload protection
Connection: Connection technique without
screws for external equipment
with safe low voltage of 24 V DC,
e.g. internal and external buttons
for impulse control.
Special functions: - Operator lighting, 3 minutes
light ex factory
- STOP/OFF switch can be
connected
- Photocell or closing edge safety
device can be connected
- Options relay for warning light,
additional external lighting
Quick release: In the event of a power failure,
actuated from the inside via a
pull cord
Remote control: 2-button hand transmitter HS 2
and separate receiver.
Universal fitting: For up-and-over and sectional
doors
Door speed: Approx. 14 cm/s (depending
on size and weight of door)
Airborne noise
emission Garage
door operator: ≤ 70 dB (A)
Boom: Extremely flat (no more than
30 mm) with integral door secu-
rity kit and maintenance-free,
patented toothed belt with
automatic belt tensioning.
Application: Exclusively for garages in the
domestic sector. Not suitable for
industrial / commercial use.
Parking spaces: Suitable for a maximum of 4-5
parking spaces
