Bedienungsanleitung Hotpoint-Ariston ad 1600 (Seite 26 von 60) (Deutsch, Englisch, Holländisch, Französisch)

307697

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

- Instructions for installation and use

Model

AD 1600

Dimensions

width 59,5 cm

height 85 cm

depth 53,5 cm

Capacity

from 1 to 5,5 kg

Electrical

connections

voltage 220/230 Volt 50 Hz

maximum absorbed power 1850 W

Water

connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0,05 MPa (0,5 bar)

drum capacity 46 litre

Spinning speed

up to 1600 rpm

Control programs

in compliance

with IEC

regulation 456

Turn the knob completely to the left and select a temperature of 60°C.

Carried out with 5,0 kg load.

This appliance conforms with the following E.E.C. directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications

The washing machine

does not drain or spin.

Is the No iron" function

selected? Complete the

programme by pressing the

Start button.

Is the drain pump clogged?

To check it, close the tap,

unplug the washing machine

and follow the instructions on

page 25, or call for technical

assistance.

Is the drain hose bent? The

tract of the drain hose must be

as straight as possible. Make

sure it is not squashed or bent.

Is the washing machines

drain duct clogged? Is there

an extension of the drain

hose? If so, is it positioned

incorrectly, blocking the water

flow?

The washing machine

vibrates too much

during the spin cycle.

Has the internal floating

unit been correctly

unblocked during

installation? See the

following page on installation

procedures.

Has the washing machine

been levelled correctly? The

levelling of the appliance

should be checked

periodically. In time, the

machine could move

imperceptibly. Adjust the feet

and check them with a level.

Is the appliance closed in

between furniture and a

wall? If it is not a built-in

model, the washing machine

needs to oscillate a bit during

the spin cycle. A few cm of

space should therefore be left

around it.

The washing machine

leaks.

Is the metal ring of the inlet

hose properly attached?

Close the tap, unplug the

appliance and try tightening its

attachment without forcing it.

Is the detergent dispenser

obstructed? Try extracting it

and washing it under tap

water.

Is the drain hose well

attached? Close the tap,

unplug the appliance and try

tightening its attachment.

Too much foam.

Is the detergent appropriate

for machine washing? Check

whether its label reads the

definition for machine wash

or hand and machine wash,

or other similar indications.

Is the correct amount being

used? An excessive amount of

detergent, besides producing

too much foam, does not

guarantee a more effective

wash, and causes scaling in the

internal parts of the appliance.

If, despite all checks, the

washing machine fails to

function and the problem

persists, call your nearest

authorised Customer Service

Centre, providing the following

information:

- the type of malfunctioning

- the model type no. (Mod. ....)

- the serial number (S/N ....)

These indications can be found

on the data plate situated on the

back of the washing machine.

Technical characteristics

Always get

assistance from

authorised

technicians and

always insist on

original spare

parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston ad 1600 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info