Bedienungsanleitung Hotpoint-Ariston AQGMD 129 (Seite 6 von 28) (Englisch)

71720

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Running a wash cycle

NOTE: the first time you use the washer-dryer, add

detergent and run an empty 90°C cotton wash cycle

without the pre-wash phase.

1. SWITCH THE MACHINE ON. Press the

button.

All the indicator lights will illuminate for 1 second

and the text OK will appear on the display; the

indicator light corresponding to the

button will

then remain lit in a constant manner and the

START/PAUSE indicator light will flash.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated by the display and

in the programme table on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

"Description of the machine".

For advice as to the type of detergent to use for

each cycle, press the

button.

4. CLOSE THE PORTHOLE DOOR.

5. SELECT THE PROGRAMME. Turn the

PROGRAMME KNOB left or right, until the required

programme has been selected; the name of the

programme will appear on the display. A tempera-

ture and spin speed is set for each programme;

these may be adjusted. The recommended drum

load level and the cycle duration will also appear on

the display.

6. PERSONALISE THE WASH CYCLE. Use the

relevant buttons on the control panel:

Modify the temperature and/or the spin

speed. The machine automatically selects the

temperature and the maximum spin speed for the

programme set and these values may not be

increased. By pressing the

button, the tempe-

rature can be progressively reduced or even set to

cold wash OFF. By pressing the

button, the

spin speed can be progressively reduced or even

eliminated altogether OFF. If the buttons are

pressed again the maximum values are restored.

 Exception: if the COTTON WHITES programme is

selected, the temperature can be increased up to

a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option has been activated, the

symbol appears

on the display. To remove the delayed start option,

press the button until the display shows the text

OFF; the

symbol will disappear.

Modifying the cycle settings.

 Press the button to activate the option; the name

of the option will then appear on the display and

the corresponding indicator light will illuminate.

 Press the button again to deactivate the option;

the name of the option will then appear on the

display followed by the text OFF, and the

corresponding indicator light will switch off.

 If the selected option is not compatible with the

set programme, the indicator light will flash and the

option will not be activated.

 If the selected option is not compatible with

another option that has been selected previously,

the indicator light corresponding to the first option

selected will flash and only the second option will be

activated; the indicator light corresponding to the

active option will remain lit in a constant manner.

 The options may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light

remains lit in a fixed manner and the porthole door

locks (the DOOR LOCKED indicator light

illuminates). During the wash cycle, the display will

show which stage is currently in progress and the

icon corresponding to each stage will illuminate. To

change a programme while a cycle is in progress,

pause the washer-dryer by pressing the START/

PAUSE button; then select the desired cycle and

press the START/PAUSE button again.

To open the door while a cycle is in progress press

the START/PAUSE button; if the DOOR LOCK

indicator light switches off it is possible to open the

door. Press the START/PAUSE button again to

resatrt the programme from the point at which it

was interrupted.

8. PROGRAMME END. The text END lights up to

indicate that the programme has ended. The

porthole door may be opened immediately. If the

START/PAUSE button flashes, press the button to

end the cycle. open the door, unload the laundry

and switch off the machine.

 If you wish to cancel a cycle that has already

begun, press and hold the

button. The cycle will be

stopped and the machine will switch off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston AQGMD 129 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info