Bedienungsanleitung Hotpoint-Ariston AVD 169 (Seite 7 von 48) (Deutsch, Englisch, Holländisch, Französisch)

76295

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Option Effect Comments

Enabled with

programmes:

Delay Timer

Delays the start

of the wash by

up to 24 hours.

Press (SELECT button) repeatedly until the desired delay is

displayed. OFF indicates no delay has been set.

All

Bleaching

Bleaching cycle

designed to

remove the

toughest stains.

Please remember to pour the bleach into extra compartment 4

(se

e page 8)

. This option is incompatible with the EASY IRON

option.

2, 3, 4, 5,

6, 7, 8, 10,

Rinse cycles.

Easy iron

This option

reduces the

amount of

creasing on

fabrics, making

them easier to

iron.

If you set this option, programmes 6, 7, 8, 11 and Delicate Rinse

will be suspended, leaving the laundry to soak (Anti-crease) and

icon will flash:

- to conclude the cycle, press the START/RESET button;

- to run the draining cycle alone, set the knob to the relative

symbol and press the START/RESET button. This option is

incompatible with the BLEACHING option.

All

programmes

except for

1, 2, 9, 10

and Draining.

Super

Wash

Allows for an

impeccable wash,

visibly whiter than

a standard

Class

wash.

This option is incompatible with the RAPID option.

1, 2, 3, 4,

5, 6, 7, 8

Rapid

Cuts the duration

of the wash cycle

by 30%.

This option is incompatible with the SUPER WASH option.

1, 2, 3, 4,

5, 6, 7, 8

Extra Rinse

Increases the

efficiency of the

rinse.

Recommended when the appliance has a full load or with large

quantities of detergent.

1, 2, 3, 4, 5,

6, 7, 8, and

Rinse cycles.

ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description

Personalisations

1. Press the MODE button to scroll through the various options available; the enabled symbol will flash.

2. To select it, press the SELECT button, until the word ON is displayed (for the Delay Timer, the time will be

displayed: see table below).

3. Confirm your setting by pressing the MODE button again: the symbol for the option will stop flashing on the

display.

The selected options can be seen on the display, as they are bordered by a frame.

Setting the temperature

Press button and the maximum temperature allowed for

the programme set will be displayed. Press the same button

to lower this temperature. OFF indicates a cold wash.

The temperature adjustment is enabled with all wash

programmes.

Setting the spin cycle

Press button and the maximum spin speed allowed for

the programme set will be displayed. Press the same

button to lower the value down to OFF, which indicates

that the spin cycle has been excluded altogether (press it

again to go back to the maximum value).

The spin cycle exclusion is indicated by symbol

The spin cycle setting is enabled with all the programmes

except for 11 and the Draining cycle.

Options

The various wash options available with this washing

machine will make for the desired results, every time.

To select the various options, the following procedure

should be followed at all times:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston AVD 169 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info