Bedienungsanleitung Hotpoint-Ariston bmbt 2022 if h ha (Seite 22 von 72) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

347220

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

3. Close the handles on either

side of the container and turn

the knob on the lid of the

container all the way to the

CLOSE position. Then turn the

knob anticlockwise to the

VACUUM position

(see figure A).

4. Press the button on the shelf

and place the container in the

central position (see figure B).

5. Lock the container into

position by pulling the button

on the shelf (see figure C).

6. Activate the Ever Fresh

function by pressing the

relevant button on the control

panel (the Ever Fresh indicator

light will illuminate). It takes

approximately 1 minute for the

system to suck the air out of the

containers. This stage is

accompanied by a noise that is

caused by the normal operation of the Ever Fresh

function.

7. Once the air suction phase has been completed,

the Ever Fresh LED switches off automatically.

8. Unlock the container from its position by pressing

the button on the shelf.

9. Take it out of the refrigerator

and turn the knob clockwise to

the CLOSE position to avoid

accidental opening (see figure

A). The absence of air inside the

container is indicated by the

valve at the bottom (see figure

D).

10. To open the container, turn

the knob anticlockwise to the

OPEN position (see figure A):

this will allow air to enter the

container and make it easy to

open. The valve will move

upwards as air enters the

container (see figure E).

! The lid of the container is provided with a circular

valve. When the valve is low (figure D) there is no air

inside the container. When the valve is high (figure E)

air is present inside the container.

! If, after you have created a vacuum (instructions

1-9), the valve moves upward (see figure E) within

three days, check the lid has been put on the

container properly and/or that the container is intact.

Check the storage status of the food before repeating

the vacuum storage operation.

! If the system does not work as it should or if the

pump remains in operation for greater amount of time

than is normal, the Ever Fresh function is deactivated

and the Ever Fresh LED begins to flash. Malfunction is

also signalled by an alarm buzzer.

To exit the alarm status and restore normal operation

of the EVER FRESH function, after checking the status

of the system and the position of the containers, press

the corresponding button on the display to switch off

the Ever Fresh LED. It will now be possible to

reactivate the function. The Ever Fresh function is

deactivated when the refrigerator compartment is

OFF.

Using Ever Fresh to its full potential

The following information is a guide on how to get the

best from the Ever Fresh system and the food it stores.

Ever Fresh containers

 Do not clean the lids in a dishwasher.

 The maximum fill level marked on the container must

be respected when storing liquids of any kind.

Vacuuming actual liquid from the container may

damage the Ever Fresh pump.

 Repeated opening of the vacuumed containers may

disturb the storage conditions of the food inside.

 Before using the system, make sure there is no

visible damage on any part of the container.

 The container valve has a built-in security system. If,

after you have created a vacuum, the valve moves

upward within three days, check the lid has been put

on the container properly and/or that the container is

intact. Check the storage status of the food before

repeating the vacuum storage operation. See

Activating and deactivating Ever Fresh.

 The containers were designed to come into direct

contact with food.

 Do not use the containers for any type of cooking (in

the microwave or oven, on an electric plate, over a

flame, etc.).

 Do not put the containers in the freezer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston bmbt 2022 if h ha Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info