Bedienungsanleitung Hotpoint-Ariston bs 1400 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

304732

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description

Personalisations

Option buttons

Function Effect Comments

Enabled with

programmes:

Super

Wash

Allows for an impeccable

wash, visibly whiter than a

standard

Class A

wash.

1, 2, 3, 5, 6, 10

Mini

Load

Use this function when

the laundry that needs to

be washed is equal to or

less than half the

recommended max. load

(see Programme table).

Reduce the amount of detergent accordingly.

1, 2, 3, 4, 5, 6, 8,

10, 11, 12, Rinse

cycle.

Easy

Iron

This option reduces the

amount of creasing on

fabrics, making them

easier to iron.

If you set this option, programmes 5, 6, 9, 11, 12 will be

suspended, leaving the laundry to soak (Anti-crease) and

EASY IRON button will flash:

- to conclude the cycle, press the START/CANCEL

button or the EASY IRON button;

- to run the draining cycle alone, set the knob to the

relative symbol and press the START/CANCEL button.

(if the temperature

is equal to or less

than 60°C

), 3, 5, 6, 9,

10, 11, 12, Rinse

cycle.

Setting the spin cycle

If, when the appliance is switched on, the KNOB is positioned

on a programme with a spin cycle, a fixed

appears. Press

button

and the maximum spin speed allowed for the

programme set will be displayed, and the

icon flashes.

Press it again and the values lower until they reach OFF, which

indicates that the spin cycle has been excluded (press it again

to go back to the maximum value); stop on the desired speed,

after approximately 2 seconds the setting is accepted: the

symbol

remains fixed. The spin cycle setting is enabled with

all the programmes except for 9 and the Draining cycle.

Setting the temperature

If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature

needs to be regulated, a fixed

appears. Press button and the maximum temperature allowed for the

programme set will be displayed and the

icon flashes. Press it again and the temperature lowers until it

reaches OFF, which indicates a cold wash cycle (press it again to go back to the maximum value); stop on the

desired value, after approximately 2 seconds the setting is accepted: the symbol

remains fixed.

The temperature adjustment is enabled with all wash programmes.

N.B.: When selecting programmes 2 and 4 the max. temperature will not be displayed; the recommended

temperature will be displayed instead (60°C and 40°C respectively). To select the max. temperature, press the

button again until 90°C appears on the display.

Setting the Delay Start

Press the button and you will see the word OFF on the display, while the relative symbol flashes.

Press the button again and "1h" appears, that is, a delay of one hour (this can reach up to 24h); stop on the

"desired" delay; after approximately 2 seconds the setting is accepted, following which, the time for the set

programme appears on the display and the symbol

remains on.

If you now press the START/CANCEL button, the set "delay" appears; this decreases every hour until the start

of the cycle. In this phase, the "delay" can only be modified by decreasing it.

The Delay Start regulation is enabled with all programmes.

For safety reasons (for example: preventing children from climbing into the drum and locking themselves in), if the door is

opened or closed before the effective start of the cycle, it will be necessary to press the START/CANCEL button again.

Keyboard Lock (see page 17).

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

If you set a function that is incompatible with another function you selected previously, only the last one

selected will be enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston bs 1400 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info