Bedienungsanleitung Hotpoint-Ariston EBYH 18242 F (Seite 24 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

591638

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate

correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation

kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical socket

ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left

side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it (see Assistance). Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

The manufacturer declines any liability should these The manufacturer declines any liability should these

The manufacturer declines any liability should these

safety measures not be observed.safety measures not be observed.

safety measures not be observed.

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in an upright

position and wait at least 3 hours before connecting it to the

electricity mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and

bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes

after being switched on. The compressor also starts each time

the power supply is cut off whether voluntarily or involuntarily

(blackout).

Freezer Compartment

When the product is switched on the freezer compartment is set to

its default value of -18°C. We recommend that the SUPER FREEZE

function is set in order to accelerate the cooling process of the

compartment; when the inside of the compartment has reached its

optimal temperature the function will be deactivated and the food

may be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is

set to its default value of +5°C. We recommend that the SUPER

COOL function is set in order to accelerate the cooling process of

the compartment. After a few hours it will be cool enough for food to

be placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer

compartment displays will indicate the temperature values set at

that moment. To change them, simply press the - and + buttons

corresponding to the compartment for which you wish to change

the set temperature. More specifically, each time the buttons are

pressed, the temperature increases or decreases and the level of

cold generated inside the compartment is adjusted accordingly.

The temperature values that may be selected for the refrigerator

compartment are +8°, +7°, +6°, +5°, +4°, +3° and +2°, while the

values that may be set for the freezer are -18°C, -19°C, -20°C, -21°,

-22°,-23° -24°,-25° and -26°. If SUPER COOL function is activated,

Fridge temperature cannot be modified. If SUPER FREEZE

functions is activated, Freezer temperature cannot be modified.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system maintains

an optimal humidity level in the compartment, preserving the

original quality of the food, preventing the food from sticking

together and making defrosting a thing of the past. Do not block

the aeration cells by placing food or containers in direct contact

with the refrigerating back panel. Close bottles and wrap food

tightly.

Using the refrigerator to its full potential

• Adjust the temperature using the display.

• Activate the SUPER COOL function to lower the temperature

quickly, for example, when you place a large number of new

food items inside a fridge and the internal temperature rises

slightly. This function quickly cools the groceries by temporarily

reducing the temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, never

hot foods (see Precautions and tips).

• Remember that cooked foods do not last longer than raw

foods.

• Do not store liquids in open containers: they will increase the

level of humidity in the refrigerator and cause condensation to

form.

Hotpoint-Ariston EBYH 18242 F Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info